PDA

View Full Version : Help with my Reel Mower!!!


greeninga
06-17-2008, 08:45 PM
I have a toro 2600-d reel mower, the reels are barely moving. I tried bleeding it, (or so I think I did) and that did not work, so what do I need to do now? Any advice?? Thanks

grassman83
06-23-2008, 11:19 AM
Check reel to bedknife clearance (turn by hand) if you cant turn by hand, then there is your answer.
Low hydraulic fluid
Check reel speed control.

dave k
06-26-2008, 07:00 PM
If you don't have a manual, you can download it from Toro, just type in your model and serial # and you'll get it, was the reels operating ok prior to this, as the other post said, check the speed control which is under the black plastic cover to your right.

dave k
07-08-2008, 04:13 PM
Did you fix it?
What was wrong with it?

k911lowe
07-08-2008, 04:16 PM
Check reel to bedknife clearance (turn by hand) if you cant turn by hand, then there is your answer.
Low hydraulic fluid
Check reel speed control.

should be able to cut a piece of paper.make sure there is that clearance.

barefootlawnsandlandscape
07-18-2008, 09:46 AM
Does that model have a reel speed controller? Some models have adjustments where you can set your reel speed to match your ground speed. Just wondering if the adjustment got turned down somehow.