Oil change pumps?

[johnnywalker]

Anyone used this? any good? anything better?
Thanks

http://www.jackssmallengines.com/oil-pump.cfm

[HBFOXJr]

I have a hand pump vacuum one I boought at a marine supply store to do my boat and it is OK. I think I read in a review article that these were not too good. There are 12 volt available from Marine supply places as well.

[keifer]

I seen one at a dealer for 17 bucks that runs off a drill the owner of the shop said all of his macanics use them so as soon as i get back down there i'm going to get one. would have to beat tipping my vac over to change the oil.

[LAZERMAN]

BRIGGS AND STRATTON MAKES A PUMP LIKE KIEFER MENTIONED IT RUNS OFF A DRILL, IT BASICALLY WORKS LIKE A WATER PUMP THEY WORK REAL GOOD. OTHER COMPANYS MAKE DIFFERENT VERSIONS, BUT FOR A FEW BUCK TRY THE B&S AND IF YOU DON'T LIKE IT THEN YOU'RE NOT OUT MUCH MONEY. GOOD LUCK AND ENJOY.

[johnnywalker]

Isn't the Briggs one off the drill the one in the link above?

[vipermanz]

walmart has the pump itself for $8

[keifer]

I just seen one in the harbor tool cat for 7 dollars it looks like a bike pump with two tubes pull up and it draws the oil push down and the oil comes out. wish i had got it before the briggs.

[lakeviewnw]

There's one out there that works pretty good. They have a website at: www.airpoweramerica.com

You might take a look and see what you think.