View Full Version : mower trap

06-22-2008, 01:15 PM
I got tired of having to strap my trimmer to the mower when traveling down the street, so I made this:

06-22-2008, 01:50 PM
Sweet! What mower?

06-22-2008, 01:55 PM
Thanks, Toro WB 36''. I mow a couple lawns down the street, got tired of strapping the blower and trimmer with bunge cords. I'm trying to come up with something for my blower.

Hook up the sulky and load up, stop at the yard, unload. Mow and trim and blow, load up, come back home.

06-22-2008, 07:48 PM
looks nice!!!

06-22-2008, 08:27 PM
What is the black on the deck belt cover for? You did not bolt that lower rack into the engine housing did you? Looks good.

06-22-2008, 08:35 PM
The black covers the cheap paint that Toro uses.......It starts peeling along the edges of the belt housing and the hold down knobs, at the time I just had rattle-can black and made a triangle/both sides, stopped the rust and hasn't peeled.

The front bracket is attached to the exhaust bolt, 5 minutes to remove the two pieces if i need to.


06-22-2008, 09:45 PM
Were did you find the clamps to hold the trimmer ? I like the set-up

06-22-2008, 10:03 PM
Clamps are the type 4x4 guys use to hold Hi-lift jacks, shovels, axes, etc....I got them though SierraExpeditions.com.....$12.00 for 2ea.

They have different sizes.

I had the metal from a sign I got off the road, welded a plate on it using my HarborFreight cheapy mig welder.....its pretty solid...

Thanks again!!