Velke X-2, Lesco Sulkey, Accelerator catcher, Truckster spreader, BP spray rack. [Archive] - LawnSite.com™

View Full Version : Velke X-2, Lesco Sulkey, Accelerator catcher, Truckster spreader, BP spray rack.

Jason Rose

06-29-2008, 09:05 PM

All for sale.

Velke X-2 sulkey, Basically NEW, used on 2 lawns, literally. Standard set-up with the 18 inch bar, Scag Orange. (I wanted yellow to match my G.Dane, but they only had orange, black, and red). The pivot mount that goes on the mower has NOT even been used. Paid $270.00 with shipping 2 months ago, Make me an offer, and you pay for the shipping. I still have the original box, though I hate to take it completely apart to make it fit back in there...

http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale001.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale003.jpg

Lesco Sulkey. Came with the Great Dane mower I bought last fall. Very heavy built, also not used much at all. This is the castering type, as you can see, allows you to stay in the same position behind the controls all the time. Everything on it is solid other than the bushing that connects the front U-shaped part to the actual cart, it's pretty wobbly, though maybe it's designed that way??? I've never been on a new one. Again, I know these are pretty expensive new, I can ship this, will have to take it apart somewhat to fit in a box. Buyer pays for actual shipping costs. Make me an offer?

http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale005.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale006.jpg

Now, This is a Jungle Jims backpack sprayer rack. Never used, never mounted. I bought it to have a 2nd one and found I had no room for it and no use for it on my other trailer. Now I'm tired of it sitting in my way... $50, plus shipping.

http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale007.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale008.jpg

Lesco "truckster" spreader. Mounts to anything you want to put it on. you just need a 12 volt power source to run the motor that spins the impellor. This has been sitting for a couple years, I cleaned the durt off of it today and confirned that it DOES still work fine. The pull cord open/close works fine, just lube the mechinism liberally and frequently, that's what I always did. Also has a reostat (basically a dimmer switch) so the motor speed can be adjusted. I tried to set it so the spread width was the same as my push spreader, but could also turn it down further to do narrower strips, works great! Bought a Permagreen, have no use for this anymore. $100.00 + shipping.

http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale009.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale011.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale012.jpg

Accelerator Catcher, basically brand new, used on a half dozen lawns at best. Model GCDN, comes with the angle bracket for decks that don't have a place to drill the hole for the catcher 'pin' to fit into. The rubber flap on the back side of the opening is my addition. I missed my alignment with the hole a little and did that to prevent blowout. It can be removed or trimmed as needed.
Fits: Dane 36,48,52, inch decks (except 36 surfer)
also fitsSnapper midsize
ALL 52" Decks- all models

$250 + shipping.

http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale013.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale015.jpg
http://i33.photobucket.com/albums/d74/26jason79/just%20junk/stuffforsale016.jpg

coryc_23

06-29-2008, 10:41 PM

I was wondering what it would cost to ship that to 43078 in urbana oh. i would give you the 100 that you where asking if the shipping wasn't to high thanks cory.

Jason Rose

06-29-2008, 11:19 PM

I was wondering what it would cost to ship that to 43078 in urbana oh. i would give you the 100 that you where asking if the shipping wasn't to high thanks cory.

I'll have to check as soon as I can. Need to get a weight on it then I can hopefully calculate pretty close.

metro36

06-30-2008, 04:39 PM

How would you work out payment for one of the sulkys. I could use either one. Also will that catcher fit a lesco fixed deck? Thanks

Jason Rose

06-30-2008, 06:28 PM

How would you work out payment for one of the sulkys. I could use either one. Also will that catcher fit a lesco fixed deck? Thanks

I can take payment through pay pal or a certified check from your bank.

With your 36" hydro I'd suggest the velke X-2. I know my 48" hydro walkbehind strugled to turn and back the lesco one because of it's weight. But it's your call, maybe the Lesco mowers have ore weight in the back end, more traction, than my great dane?
As for the catcher I have listed what model it is and what it will fit, I'm unsure how close it would be to the lesco opening, you could ask accelerator to find out.

metro36

06-30-2008, 09:03 PM

Let me look into the catcher and I will let you know. thanks

Jason Rose

07-06-2008, 03:43 PM

Bump to the top!

Spreader may be sold, it's boxed and ready to get a shipping quote.

Velke X-2 is in it's box and ready to ship, someone buy it, brand new (almost) heck of a deal!

Everything else still for sale as well.

JosephLawnCare

07-06-2008, 08:40 PM

Shipping price for the bagger to 43054. thanks

Jason Rose

07-07-2008, 05:03 PM

Shipping price for the bagger to 43054. thanks

Well, people are absolutely insane. The box needed is 20x20x40 and the weight would be about 25 pounds. The price I was quoted you would think I was trying to ship a crate of gold bars.

Yeah, they want $133.65, and that's not including the almost $10 they want for a box that big...

Jason Rose

07-07-2008, 05:04 PM

I was wondering what it would cost to ship that to 43078 in urbana oh. i would give you the 100 that you where asking if the shipping wasn't to high thanks cory.

Shipping $42.91 to you.

JosephLawnCare

07-11-2008, 04:59 PM

Well, people are absolutely insane. The box needed is 20x20x40 and the weight would be about 25 pounds. The price I was quoted you would think I was trying to ship a crate of gold bars.

Yeah, they want $133.65, and that's not including the almost $10 they want for a box that big...

Is that a UPS quote??? WTF??

Jason Rose

07-11-2008, 10:53 PM

Is that a UPS quote??? WTF??

FedEx I believe, and they were the cheapest option...

Yeah I don't know what the hell is going on, but they are raping people to say the least.

Jason Rose

07-11-2008, 10:59 PM

FedEx I believe, and they were the cheapest option...

Yeah I don't know what the hell is going on, but they are raping people to say the least.

OK, I just looked on FedEx.com and found out that the catcher *should* ship for 46.60 roughly. I guess the shipping place I use gets about $90 for themselves! Time to find a new shipping place!!!

coryc_23

07-11-2008, 11:47 PM

Jason Sorry That I Hadn't Got Back To You Sooner I Been Trying To Get Caught Up From The Rain. Ok I Lost My Bank Card That I Had My Paypal Account Setup, So I'm Waiting On My New Card To Come So That I Can Put It On Paypal Or I Can Send You A Check You Just Let Me Know Inless You Have Already Gotten Rid Off It Thanks.

Jason Rose

07-11-2008, 11:51 PM

terryswafford

07-12-2008, 09:10 PM

I am interested in rack will it hold a stihl BR600?

terryswafford

07-12-2008, 09:12 PM

sorry I didnt read carefully now I see it is a sprayer rack. Still interested what brand sprayers will it hold?

terryswafford

07-13-2008, 01:27 PM

is the rack still for sale?

Jason Rose

07-13-2008, 10:26 PM

is the rack still for sale?

Yes, it holds Solo sprayers and the similar style other brands.

CHoniglandscapes

07-27-2008, 06:47 PM

Do you still have Velke? I will buy it! please let me know ASAP thanks.

coryc_23

07-28-2008, 11:35 PM

jason it cory just thought i would check and see if you sold that spreader yet thank you for your time.

TheBigGW

11-07-2008, 08:09 AM

Have you sold either of the two sulkey's thanks

asphalt cowboy

04-11-2010, 03:45 AM

i'll pay 150.00 with shipping included for the lesco sulky

honeydopm

04-11-2010, 10:56 AM

This is a year and a half old thread

Jason Rose

04-11-2010, 10:59 AM

Ditto, I'll flag this thread to be removed. I thought it had been long ago.