PDA

View Full Version : New allan block cap


Mike33
06-30-2008, 09:51 PM
Imagine this we now have a 18" block with a 12" cap. How does every one think this will work? Picked up caps today and allan block changed there cap from 18" which is the size of ther block to 12". I had a straight wall and you couldnt make it work out with out cutting almost every cap than having a smaller piece to make bond lines meet. Does every one else agree the cap should be the same size as the block?
Mike

Stonetech
07-03-2008, 01:13 AM
Mike,
some block companies ahve started offering 12" caps FOR bond lines. With an 18 in block, you center a 12 on it, then go from there, so instead of having one seam in the middle of the block, you have two per block and are off set. so it looks like this -> (bear with me)
________________________________________________________
|_____|____________|____________|____________|___________|
|_________|__________________|__________________|________|
|__________________|__________________|__________________|
|_________|__________________|__________________|________|
__________________|__________________|__________________|


So instead of having it look like stacked bricks, its more lines, appears smaller, smoother curves, more like a finishing touch than a half height wall block.
Think a little more outside the box bud, you can't really go wrong.

hope that helps....like i said, forgive the art work didn't feel like attaching a CAD file.