PDA

View Full Version : 4 tons of 2a limestone?


mcgruff
07-10-2008, 01:14 AM
Hi, I am installing a 15 x 20 foot patio behind my house. I was told by a local supplier that I would need 4 tons of 2a limestone. my question is: How think of a base would that give me?
I am not sure how to do the calculation.
thanks in advance:rolleyes:

amscapes03
07-10-2008, 06:45 AM
Your supplier is just a little off. For a 6" base you'll need more like 8 to 8 1/2 tons. 4 tons would give you less than 4" after compaction.

AJ Lawnscapes
07-10-2008, 07:18 AM
You should have a base 4"-6" with 1" of screed sand when you lay your pavers(unless your doing concrete, then 6" base with 4" of crete).

The calculation is: L x W x D / 27 = Yards/Tons

20'L x 15'W x .5 (6") D / 27 = 5.5555
20'L x 15'W x .333 (4") D / 27 = 3.70 yards

So you're either buying 6 yards or 4 yards mathmatically. Of course you'll want a foot or so on each side that is exposed for support. So your 20x15 turns into 22x17 for your base, depth (D) stays the same.

22'L x 17'W x .5(6")D / 27 = 6.92
22'L x 17'W x .333(4") / 27 = 4.61

Have fun. Make sure you get 2A or 2B modified

mcgruff
07-11-2008, 11:32 PM
Hey guys, thanks for the great information and formulas.
Looks like I will be calling for more.
Thanks again

zedosix
07-13-2008, 02:08 PM
Don't forget... One cubic yard of granular usually weighs more than one ton. I usually multiply by 1.4 to achieve proper weight of material to be delivered.

mcgruff
07-13-2008, 07:25 PM
i thought it was more than a ton...great.......thanks