PDA

View Full Version : Good Dog, Bag Dog


EagleLandscape
07-14-2008, 09:14 AM
We have this customer, who we did like 25 hours of repair just to get the system operational earlier this spring. We've made 3 calls since the initial visit to repair nozzles he giant german shepard loves to chew on.

Good customer:)

DanaMac
07-14-2008, 09:20 AM
Replace with brass. :)

Wet_Boots
07-14-2008, 09:27 AM
Replace with brass. :)Damn straight!

Dirty Water
07-14-2008, 10:02 AM
Ditch the risers.

EagleLandscape
07-14-2008, 12:19 PM
He eats the whole head, not just the nozzle. Thought about going all brass head, he doesnt eat those, but I'm thinking that's going to be way too expensive (if we can even find them).

FIMCO-MEISTER
07-14-2008, 12:22 PM
He eats the whole head, not just the nozzle. Thought about going all brass head, he doesnt eat those, but I'm thinking that's going to be way too expensive (if we can even find them).

Go to Riggs 3724 Race St I believe. Over by Tom Landry/baylor Hosp on Gaston. Tell em Peter sent you and tell Betty I said Hi.

EagleLandscape
07-14-2008, 12:57 PM
ask scott about this customer that has these troubles. he's a fun one:) northhaven/yorkshire area.

FIMCO-MEISTER
07-14-2008, 12:59 PM
ask scott about this customer that has these troubles. he's a fun one:) northhaven/yorkshire area.

Great area, lots of retired disposable income.

MarcSmith
07-14-2008, 01:53 PM
take the dog a t-bone on the next call you get....Gotta reward your referall....:)

WalkGood
07-14-2008, 02:20 PM
I TOLD you rubbing bacon on the nozzles would get you more repair work than you can handle!

Mike Leary
07-14-2008, 03:33 PM
I had one job where every maxi-paw was hammered, asked the client what happened?
He said, "fire it up, you'll see". Fired it, out of nowhere came this Terrier & literally
threw himself at the heads. I looked at him & said "good dog". We replaced all the
maxis with PGPs & that was the end of it.

FIMCO-MEISTER
07-15-2008, 06:37 AM
He eats the whole head, not just the nozzle. Thought about going all brass head, he doesnt eat those, but I'm thinking that's going to be way too expensive (if we can even find them).

Start with brass nozzles. I've found that they start chewing at the nozzle and if it hurts their teeth they give up. If the dig up the heads when they aren't running that's a different matter.

AI Inc
07-15-2008, 06:39 AM
Thats my first call of the day today, replacing heads the dog chewed.Gonna bring him a thank you snack.

EagleLandscape
07-15-2008, 07:32 AM
yes peter, scott put on brass nozzles, but hopefully that will stop it:-\

Waterit
07-15-2008, 08:39 AM
Had to put in concrete VB's for one customer a while back - their Lab would dig up the plastic ones and chew them to bits, then chew the handles and wiring off the valves...