PDA

View Full Version : I keep comin-up MP


Juan if by land
07-19-2008, 04:05 PM
A job with irregular lay out with lawn bordered by low ground cover,lays out on paper best with 18' radius(radii?)

Low water available,6gpm,less than 1/2 acre.

MP rotator?

Waterit
07-19-2008, 04:26 PM
The 2000 flavor would be my choice.

Mike Leary
07-19-2008, 05:19 PM
Low water available,6gpm,less than 1/2 acre.MP rotator?

Yup, what's the low water deal, a well? I like 35psi to 50 for those little dears,
with 50 my choice. Remember, a run time of a hour or more is normal 'cause
of the low precip. rate; you may need a delay in between zones and/or
multiple start times.

Juan if by land
07-20-2008, 10:12 AM
Yup, what's the low water deal, a well? I like 35psi to 50 for those little dears,
with 50 my choice. Remember, a run time of a hour or more is normal 'cause
of the low precip. rate; you may need a delay in between zones and/or
multiple start times.

Street water 3/4" line,5/8 meter. Tests out at 6gpm@46psi

Anyone use the MP strip and corners?How bout the MP1000 for smaller radius stuff?

FIMCO-MEISTER
07-20-2008, 10:22 AM
Street water 3/4" line,5/8 meter. Tests out at 6gpm@46psi

Anyone use the MP strip and corners?How bout the MP1000 for smaller radius stuff?

We use them all. Corners leave something to desire. 100s are okay just don't stretch

Juan if by land
07-20-2008, 10:28 AM
We use them all. Corners leave something to desire. 100s are okay just don't stretch

corner troubles...even coverage or accuracy?

CAPT Stream Rotar
07-20-2008, 01:13 PM
i dont think its troubles, just that those run times are going to take a while..

I think the 2000 @ 40 psi throws 20 or so with .5 gph or close to that..