PDA

View Full Version : Toro 640 VIH


brookviewlawncare
07-19-2008, 05:36 PM
Anyone know where to find nozzle charts online for the 640s Thanks Dan

FIMCO-MEISTER
07-19-2008, 10:24 PM
I regret doing this but no thread should go unanswered. I googled your request and got this. You take it from here.

http://www.toro.com/irrigation/com/lgturfsprink/640/index.html

Wet_Boots
07-19-2008, 10:57 PM
made you look

brookviewlawncare
07-20-2008, 07:17 AM
I have looked all over but still cant find nozzle charts for the 640

FIMCO-MEISTER
07-20-2008, 09:03 AM
I can't open because it comes in a word document but isn't it in product lit on this page?
http://www.toro.com/irrigation/com/downloads/com_rotors_download.html

Wet_Boots
07-20-2008, 10:03 AM
Not on the 'Bidding Specs' page.

brookviewlawncare
07-20-2008, 02:50 PM
I dont have word at home and a think i tried them all at the office on friday :confused:

Wet_Boots
07-20-2008, 03:39 PM
Why not look for a 'equivalents' page, like the data card that used to come with Hunter rotors? 640's are a standard, so there have to be comparison pages.

brookviewlawncare
07-20-2008, 04:49 PM
great idea

Waterit
07-20-2008, 05:44 PM
Why not replace it with a head from a good mfr.?

Wet_Boots
07-20-2008, 05:52 PM
What's the application here?

Mike Leary
07-20-2008, 07:16 PM
What's the application here?

:::::Backs out of thread in convulsions:::::::

Wet_Boots
07-20-2008, 08:14 PM
Fair question. Folks usually know the performance of products they will use, and don't have to roam the internet for specs.

brookviewlawncare
07-20-2008, 09:00 PM
I am in the process of bidding a non spec ball field and have not messed with sports field besides service in the last 12yrs! It just seems to me that the 640valve in head is still the most easy to install service and maintain. I have looked over the specs of the other sports turf rotors and if memory serves me right the 640 is still the king. (alright i am ready for the bashing to begin )

Wet_Boots
07-20-2008, 09:14 PM
You could probably use Hunter I-40 heads in ballfields, and also refer to their layout data, even if you'll stick with 640s

You would be using hydraulic controls?

brookviewlawncare
07-20-2008, 09:25 PM
I don't know exactly what i am planing :confused: I don't think the controls are available beside the conversion boards

Wet_Boots
07-20-2008, 09:32 PM
That's why I'm asking, since the 640 VIH are hydraulic normally-open. Most ballfield designs today would have zone valves and ordinary heads.

brookviewlawncare
07-20-2008, 09:36 PM
To me the 640 no vih still makes sense

Mdirrigation
07-20-2008, 11:56 PM
The 640 is great head , its almost bullet proof.