if i order a new transmission for a walk behind does it come with the shaft that goes

[Caleb12321]

to the pully?

[slone]

I Do Believe It Will

[Caleb12321]

does anyone know for sure, i dont wanna spend 250 and it not come with it. but im sure it does, just want to know for sure

its the peerless transmission 700 078

[Breezmister]

to the pully?

Which pulley ? The input or the two out put :laugh: Yes, it does. Just make sure when you get it that the numbers match. I ordered a 700 series once and after I got it on the machine, discovered that the numbers did not match. The only difference was one was a 5 speed and the one I got was a 4speed.

[B&A lawn care]

Check with J Thomas before you buy that 700-078. When I bought a 700-??? for my Exmark just a couple months ago it was $50 cheaper there than anywhere else. Yes the shaft you refer to (input) comes with. They also have the spline couplers you likely also need.

http://www.j-thomas.com/

[Caleb12321]

Check with J Thomas before you buy that 700-078. When I bought a 700-??? for my Exmark just a couple months ago it was $50 cheaper there than anywhere else. Yes the shaft you refer to (input) comes with. They also have the spline couplers you likely also need.

http://www.j-thomas.com/


yea this is where i was looking at. i dont need the spline coupler i have them.

but thanks

[topsites]

Yes the transmissions all come with all three shafts that come two out of the sides and one on the bottom that goes to the pulley, but they do NOT come with the pulley itself, that has to be pulled off the old one or you can order a new one.

DO make SURE you get the exact 700-xxx :p