PDA

View Full Version : Official 2008 Home Made Trailers Page


resurectionlawn
08-02-2008, 08:40 PM
Post Pics Of Your Home Trailers,trailer Signs And Wraps,enclosed Set Ups And Customizations Made To Your Trailers.

resurectionlawn
08-02-2008, 11:59 PM
Come On No One Has Pics Of Their Trailers

deere615
08-03-2008, 12:35 AM
Heres a link to some pics of my custom built stainless steel trailer and my truck:
http://www.lawnsite.com/showthread.php?t=241011

Kglenn04
10-17-2008, 01:04 AM
I think this is a great idea

deere615
10-18-2008, 02:56 AM
Ya, come on there has to be more custom built trailers out there

shepoutside
10-18-2008, 11:26 AM
Small 5x8 I made for a specific piece of equipment..........

Kglenn04
10-18-2008, 06:08 PM
very nicely put together

STIHL GUY
10-18-2008, 06:22 PM
thats a nice trailer

South Florida Lawns
10-18-2008, 11:47 PM
Heres a link to some pics of my custom built stainless steel trailer and my truck:
http://www.lawnsite.com/showthread.php?t=241011

that material alone is worth probably more than my chevy. That thing will last forever.

Kglenn04
10-19-2008, 08:20 PM
below are some pictures of my trailer with the drop down gate that I made im so proud of my self for that. let me know what yall think.

(before I built the drop down gate)

Kglenn04
10-19-2008, 08:22 PM
Getting started bulding the out line for the drop down gate before I put the supports in or mesh gate

Kglenn04
10-19-2008, 08:30 PM
After frame was built. I applied the mesh gate down then bolted it in it is really strong and hold weight fine.

Attaching the hinges to the floor of the trailer

Finished pictures I may go with three hinges instead of two

farmboy1285
10-20-2008, 12:09 AM
Its not homemade but I put the steel floor on it and some steel cross beams.
http://i280.photobucket.com/albums/kk178/farmboy1285/Picture162.jpg
http://i280.photobucket.com/albums/kk178/farmboy1285/Picture163.jpg

LemkeLawns
10-20-2008, 01:10 AM
Here is a link to the tail gate lift on one of my trailers. I also built this trailer when I was a senior in high school. 18'x6'4", 6" channel frame. Three years later it was retired from being the main trailer, ended up being to narrow to carry our 72" mowers.

http://www.lawnsite.com/showthread.php?t=162135&page=2

Kennedy Landscaping
10-20-2008, 01:20 AM
Looks like you're off to a good start glenn. Keep it up

Kglenn04
10-20-2008, 02:16 AM
Looks like you're off to a good start glenn. Keep it up

lol just trying to get up there with the rest of the big boys like yall. I'm up set that I'll have to wait till next spring to use it its getting to be fall clean up time around here think I may be on my last cut week this week.

Kglenn04
10-20-2008, 02:17 AM
Here is a link to the tail gate lift on one of my trailers. I also built this trailer when I was a senior in high school. 18'x6'4", 6" channel frame. Three years later it was retired from being the main trailer, ended up being to narrow to carry our 72" mowers.

http://www.lawnsite.com/showthread.php?t=162135&page=2

thank you for the pictures

deere615
10-21-2008, 12:10 AM
Nice work everyone!

Sweet Tater
10-21-2008, 06:23 PM
I think most everyone has seen my trailer by now, and are probably sick of it. but heres a link to the pics anyway. http://www.lawnsite.com/showthread.php?t=217235

TXNSLighting
10-21-2008, 06:41 PM
I think most everyone has seen my trailer by now, and are probably sick of it. but heres a link to the pics anyway. http://www.lawnsite.com/showthread.php?t=217235

Im not sure but is that a dodge?? :laugh: j/k

GreenAcresLC
10-22-2008, 12:06 AM
Not much of a trailer here, just a 4'6" x 12' that I built in 1997 to haul ATV's on. Built from the axle of an old boat trailer I had...kind of a mistake, as the 4 x12 tires aren't really heavy enough for any real weight. That being said, you can see that I've built an 8' long by 2' high box to haul mulch in. Can get about 3 yards of mulch in it, the tires do well. And, it will carry one hell of a load of tires! Thinking about how to get them on the ZTR, but I believe it's overkill!! 48" tall x 31" wide may be a little much for a simple mower.

Nice trailer Tater! I've never thought of such an idea, but it is a great one.

Sweet Tater
10-22-2008, 08:06 PM
Im not sure but is that a dodge?? :laugh: j/k

Gehave I like my dodge.... :rolleyes:

Travis E
10-22-2008, 08:24 PM
We made our own, 16'. Only real picture i have is in my signiture, will try to find more. BTW, it looks just like one you'd buy, but we tried to beef it up some.

Kglenn04
10-22-2008, 08:52 PM
wow thats a serouis if its pulling thoes big tires

GreenAcresLC
10-22-2008, 11:06 PM
wow thats a serouis if its pulling thoes big tires


Yeah, these are some monsters. They go to a lime/fertilizer spreader truck that my dad owns. Four of those on the back, two on the steer. Not much stops this thing.