PDA

View Full Version : Trailer Cage


freshprince94
08-08-2008, 12:09 AM
Is there anywhere I can BUY one of those cages on the front of trailers for BP blowers and such...I am looking to purchase one as I am not much of a welder. Thanks!

MileHigh
08-08-2008, 12:16 AM
I dont know...but if you can find one get one...or get a welder, there very useful..I would hate not to have a storage box on my trailer.

Cashio13
08-08-2008, 12:30 AM
kinda expensive but definitely worth it...

http://shop.easternmarine.com/index.cfm?fuseaction=catalog.prodInfo&productID=9258&categoryID=0

justanotherlawnguy
08-08-2008, 12:45 AM
Like this?
I got this at my local weld rite dealer, they are out of Ocala I believe, so I am sure there is a place in Orlando to pick one up. This was on my old trailer a few years ago and it was $350 installed then. I am sure with the price of steel lately its probably near $500 now. Well worth every penny though....

KrayzKajun
08-08-2008, 09:34 AM
Like this?
I got this at my local weld rite dealer, they are out of Ocala I believe, so I am sure there is a place in Orlando to pick one up. This was on my old trailer a few years ago and it was $350 installed then. I am sure with the price of steel lately its probably near $500 now. Well worth every penny though....


i like the little shelf in there! i had mine made at a trailer builder near me!

freshprince94
08-10-2008, 08:28 PM
Thanks guys, I am going to look into it...my trailer came with a cage but it was mounted to the bottom of the trailer like a storage box. I am going to see if I can have it mounted on the trailer.

dura to the max
08-11-2008, 06:29 PM
Like this?
I got this at my local weld rite dealer, they are out of Ocala I believe, so I am sure there is a place in Orlando to pick one up. This was on my old trailer a few years ago and it was $350 installed then. I am sure with the price of steel lately its probably near $500 now. Well worth every penny though....

that is a great idea about the shelf.

i paid about $500 earlier this year, but it's worth every penny. i protect a couple thousand worth of equipment w/ it.

if you are primarily thinking of blower storage check out the blower racks that northern tool has. i have 2 blowers and there just wasnt enough room in the cage for my stuff so i added one of these too.

http://www.northerntool.com/webapp/wcs/stores/servlet/NTESearch?storeId=6970&N=0&Ntk=All&Ntt=blower%20racks&Nty=1&D=blower%20racks&Ntx=mode+matchallpartial&Dx=mode+matchallpartial

freshprince94
08-11-2008, 10:22 PM
Found one on TSC, do you guys think this is wide enough to fit an Echo PB-265 L or a future Stihl BP blower?

dura to the max
08-12-2008, 12:05 AM
they normally only sell 5' cages. would depend on your trailer size.

freshprince94
08-12-2008, 02:55 PM
Trailer size is 4x8

I like the Rack EM cage but its way to much $$$

Matt TrailerRacks.com
08-12-2008, 05:04 PM
Hello Guys,

We are considering designing and manufacturing a Trailer Cage and were wondering what you guys where looking for.

Size?
Price Range?
Features?

Thanks for the help

VT MOWER
08-12-2008, 11:32 PM
Found one on ebay for $350.00 same as the picture without the shelf. 2 X 2 X 6 1/2

deere615
08-13-2008, 12:20 AM
Found one on TSC, do you guys think this is wide enough to fit an Echo PB-265 L or a future Stihl BP blower?

I was going to mention that one, its made by carry on I think the dimensions are on their web site. I made mine and if I had to my bp blower could fit side ways