View Full Version : Quick Connectors
09-20-2008, 06:01 PM
I was wondering if anyone knows where I can get some of these connectors for my demo kit. I bought a vista demo kit about year ago, and you connect everything with these connectors. I want to expand my demo to more fixtures so I need to get some more of these connectors. They say Q-tee on the side but I could not find anyplace that sold them. thanks
INTEGRA Bespoke Lighting
09-20-2008, 06:21 PM
Did you try contacting Vista? I am sure they would send you out a bunch.
09-20-2008, 06:46 PM
Or you can contact cast as well. They use the same thing. What about radio shack, or a local electric supply house?
09-20-2008, 08:37 PM
I posted info on it a while back.
Look through the threads on demo kits.
It's a NAPA Auto Parts part number. And I bet I posted it his past July.
Don't feel like going through bins in the garage right now.
Got a private message asking about the 2 pole trailer connector , so I thought I'd answer it where anyone interested could see...
It's Napa part #755-1598. They call it a " 2-flat electrical connector loop -12" "
Cut it in half and you have two 6" M x F ends that you can attach to your fixture leads or lengths of cable (I used NS quarter ace connectors).
They're a perfect fit with the Vista demo kit connectors.
09-21-2008, 12:15 AM
definitely Napa part, get a few every year for my sanders
09-21-2008, 12:22 AM
Can you get them with 12 gauge wire? Looking to add a couple of longer runs to my set up.
09-21-2008, 01:11 AM
That appears to be your standard 2-wire flat trailer connector.
Remember, you asked.
Not to resurrect an old thread, you pros might want to look at this company for wiring connections.
09-21-2008, 05:46 AM
Those are Amphenol .180 bullet connectors. You will most likely find trailer/automotive wire harnesses in the retail market using thermoplastic insulation. I wouldn't waste time on cheap crap from auto part stores, since they use all imported stuff from China.
These are standard clearance/marker connector cables used on tractor trailers. High quality OEM parts made in USA. Truck-Lite makes them- Part No: 50356. (top of photo) They are available in twelve-inch increments from 12" to 276'!
Now if they are molded with PVC landscape lighting cable, it is a custom in-house part on behalf of the manufacturer. You might want to contact them directly.
09-22-2008, 12:40 AM
...I wouldn't waste time on cheap crap from auto part stores, since they use all imported stuff from China......
Mine from NAPA are a perfect fit with the Vista connectors and have worked flawlessly for the 14 months I've been using them.
11-09-2011, 10:18 AM
It has been a while since I have been on the forum, but I found a box of miscellaneous items after my move. I have about 50 NAPA quick connectors that I purchased after reading this thread, that I don't need anymore.
They are NAPA part number 755-1598 and according to this thread, are said to be a perfect fit to the Vista connectors.
If you are building your own demo kit or adding on, these connectors are perfect.
I will sell them for $1.50 each. I called NAPA and they are $2.50 there. I would like to sell at least 10 at a time preferably. I thought I would offer them to you guys before I throw them on Ebay.
Hope your season is going well.
11-09-2011, 10:31 AM
I remembered incorrectly....I only have 23 of these. Thanks
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.