PDA

View Full Version : 2006 32" Ferris hydrocut $1,400


Dunn's
10-08-2008, 08:17 PM
2006 Ferris Hydrocut 13 hp pull start. $1,400. May trade just let us know what you have. Unsure of hours probably around 500 maybe less.


Also have a 52" Ferris for sale on here to and may trade both toward something if you are interested in them both.

Thanks for looking

Lakewlc
10-08-2008, 09:02 PM
pic's?????

Dunn's
10-08-2008, 10:49 PM
Next time I am at the shop I will try and get some.

turfsolutions
10-08-2008, 10:53 PM
Where are you located?

Dunn's
10-08-2008, 10:56 PM
missouri

Thanks for the bump

Dunn's
10-09-2008, 09:08 PM
A little blurry because it was getting dark

Dunn's
10-09-2008, 09:10 PM
a few more

Dunn's
10-11-2008, 04:58 PM
will sell both together for $2,400.00

http://www.lawnsite.com/showthread.php?t=248847


have atleast five sets of blades for each. Probably more. high lift and gators

may throw a grass gobbler in with them if we get a 36/32" hydro exmark with ecs grips.

underPSI
10-13-2008, 10:08 PM
What in the hell is all of that oil leaking down the side of the deck?

Dunn's
10-14-2008, 12:47 PM
that is where the oil drain hose is.

you know the oil should be changed every 50 hours right.

Dunn's
10-14-2008, 12:49 PM
that is where the oil drain hose is.

you know the oil should be changed every 50 hours right.

if you look a little closer right above the dischargechute you can see the oil discharge hose point right there.


and yes the oil drain design is flawed and should have a little longer hose on it. So you can put it right in an oil pan instead of having to lay something under the hose that the oil can run down into the oil pan.