PDA

View Full Version : I need a Blade Sharpner


Kickin Your Grass
10-25-2008, 10:02 AM
I just bought a Oregon blade sharpner and hate it! It does not sharpen the entire blade. I run all Toro mowers ( 52" ZTR, 32" W/B, 21" Push Mower) They all have straight blades (no wavy blades) What Magna-Matic do you think would be good for me and do you have any demos for sale?

Magna-Matic
10-26-2008, 11:13 AM
Hello,

The MAG-9000 will be best suited to your needs. There is no limit to the cutting edge length, and you will produce a consistent 30 degree angle on every blade you sharpen.

See here for more info.
http://www.magna-matic.com/sharpeners/mag9000/index.html

Design info.
http://www.magna-matic.com/sharpeners/mag9000/difference.html

Also unlike OREGON you can purchase a MAG-9000, and if you do not like it, you may return it within 30 days for full refund of the equipment cost. My guess is that OREGON will not take back the sharpener now that you've used it.

We currently do not have any demo units available, we've just returned from GIE EXPO, and the demo units were sold at the booth.

Thank you,

Kickin Your Grass
10-27-2008, 01:47 AM
When you get a demo please let me know first.

Magna-Matic
10-27-2008, 11:19 AM
Hello Allen,

Because the number of people who want demos is huge, we do not keep a waiting list, because we perhaps get 1-3 demos/scratch and dent per year. Instead we put them on our online store when they are available.

http://magna-matic.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=MOS&Category_Code=blem

Or if you visit us at GIE + EXPO, we discount the units, and have the demos we use there available to show attendees.

Thank you,

OKSooner
12-01-2008, 07:53 PM
Reference.

Magna-Matic
12-02-2008, 12:37 AM
Hello,

I do not understand your "REFERENCE" comment. Please clarify.

OKSooner
12-02-2008, 10:18 AM
That's my way of subscribing to this thread for later reference. Now that it's one of my subscribed threads I can refer to it thru my subscribed threads tab, and I also get notifications thru my email when it's updated - as I did just now when you posted to me.

As long as we're talking... where are your machines made, and do you have servicing dealers in Oklahoma?

Magna-Matic
12-02-2008, 11:07 AM
Hello,

We are located a bit north of Milwaukee WI, and all of the equipment is manufactured at that location.

We sell our products direct. You deal directly with the factory, this way you get the best service, and response to the products.

Thank you,

gb187
12-19-2008, 11:06 PM
Mag 9000 owner. One of the best tools I've bought in years. I change blades every day in our growing season(75 to 100 lawns per week). The only disappointment is the waiting list.Ha Ha. About a minute per blade on a dull set. Step up and buy one you wont regret it

Magna-Matic
12-22-2008, 05:08 PM
Hello gb187 and all others,

Just a note, we've worked out the production problems with our motor supply, and there shouldn't be any wait for the MAG-9000 any longer.

Thank you for the compliments!

Happy Holidays and Merry Christmass all