PDA

View Full Version : truck loader help!!!!


2low4NH
11-06-2008, 12:10 PM
okay i have an older 11 hp truck loader i bought it used it has alot of hours on it casing has been rewelded and plated. lots of hours on it! i picked it up in the summer checked it out real quick looked like crap ran great. so i have done 10 clean ups with it made my money back on the purchase :clapping: but now i have a problem! i need a new impeller for it and i have no clue what the model # on this thing is!!!! where can i find it and if its not on the machine anymore how do i know which one to buy? i think it has a 10 inch intake and a 6 inch discharge

PowerEquipmentWarehouse
11-06-2008, 04:06 PM
Do you know what brand it is? That's a good starting place. Plus, you're going to need to know the size of the crankshaft. If it is a Giant Vac, Trac Vac, or Little Wonder unit, we can probably help you out, as we carry parts for those brands. Call me at 800-769-3741 if it's any of those brands. Good Luck! Lisa @ Power Equipment Warehouse...

2low4NH
11-06-2008, 05:38 PM
its a billy goat

russ and sons
11-10-2008, 01:25 AM
it sounds like mine. i have a tr1100 . 11 horse briggs i/c engine. 10 inch intake and 6 inch discharge. i called billy goat and they gave me a impeller number to order and he also sent me a diagram of it . socall billygoat or e-mail them and they will get right back toyou on it. there is a tag with the modelnumber abd serial number on it , just looki it over closely .

russ

2low4NH
11-10-2008, 09:36 AM
it probally got either welded over or painted over the whole casing was replated on the outside edge

russ and sons
11-10-2008, 09:41 AM
if you send me your e-mail i can send you a spec sheet they sent me, then you can see if it is the same model

russ

2low4NH
11-10-2008, 07:00 PM
pm sent thanks

Mr. Force™, Billy Goat Industries
11-11-2008, 12:00 PM
Sorry for the delay. I forgot to check this area for questions. If you've still got questions please don't hesitate to PM me.

Drew

russ and sons
11-11-2008, 02:24 PM
i sent the spec sheet that danny s sent me from billy goat. it seems 2low4nh has the same model . so he is all taken care of. You could thank Danny for me, as he took care of me by sending me specs on the tr1100 .


thanks,

russ

:weightlifter:

2low4NH
11-11-2008, 05:13 PM
i already got an email back from him really quick response from him. he is going to find the closest dealer for me the price is much lower then expected

russ and sons
11-11-2008, 09:51 PM
i paid $129.00h for mine . it works great now. i got it from turf depot in

n.h.http://www.turfdepot.com/
should be pretty close to you .

russ

2low4NH
11-11-2008, 11:57 PM
yeah he said retail was 127 i thought it was gonna be closer to 200! i may hold off till spring if i dont get any more calls for clean ups

Mr. Force™, Billy Goat Industries
11-12-2008, 11:23 AM
Glad we were able to help. I'll pass on the kudos to Danny. He's a real asset here. He's got a tough job as when a person calls him it's not because everything is fine. I see both Danny and his wife who's in shipping every day.

Drew

2low4NH
11-12-2008, 01:00 PM
thanks for that link they have impellers for 99 dollars and its only an hour away from me. i gotta check with my local dealer who is 2 minutes down the road see what his price is first. i love this site great for finding out little info like this and saving me money

russ and sons
11-12-2008, 08:37 PM
thanks for that link they have impellers for 99 dollars

i think it's $129.00 now, that catalog i think was from 2007 . we take the same impeller. i thought i was getting a deal at $99.00 too.


russ

2low4NH
11-12-2008, 09:25 PM
to good to be true damn! maybe if i go up to manch this week ill stop in there and try and work a deal

russ and sons
11-12-2008, 09:46 PM
good luck,

russ