PDA

View Full Version : Motion control


Rainman7
11-15-2008, 05:55 PM
Does anyone know of any motion control produts that can be used with low voltage lighting?

S&MLL
11-16-2008, 12:20 AM
James posted something a while back. Give me a second I will try to find it. I think I saved the link on my other computer

S&MLL
11-16-2008, 12:21 AM
nope this computer



http://www.residential-landscape-lighting-design.com/store/low_voltage_RLLD1873RAB.htm



Im sure he can have more info.

I have never used it but figured it would come in handy one day

ccfree
11-17-2008, 10:13 AM
Does anyone know of any motion control produts that can be used with low voltage lighting?

Check out ABT (advanced bridging technologies) as they just came out with a wireless motion sensor. You can also look at the dominator by Nighscaping. Hope this helps.

Lite4
11-17-2008, 11:25 AM
You could hire me. I will just stand back in the shadows by the house, cleverly concealed by some bushes or trees. When I see movement I can turn my flashlight on the moving object. This is 'Smart' technology! Well.....maybe not!

Dreams To Designs
11-17-2008, 12:41 PM
Craig, do you know if the motion sensor controls one fixture or a whole transformer, maybe something in between?

Kirk

JoeyD
11-17-2008, 12:58 PM
I think that Hydrovation has one.........12v motion sensor..........

www.hydrovation.com

S&MLL
11-17-2008, 07:10 PM
Dreams It all comes down to how many watts the sensor can handle. If its a 300 watt trans and a 300 watt sensor then your good to go. But the only times I can see them being used are for 1 or 2 down lights along a trail. After Tim's comments on abt Im a little worried about installing their products. Also on a sidenote. Dreams would you like to meet up and have lunch this winter?

S&MLL
11-17-2008, 07:13 PM
I went to ABT's website and could not find info on the motion sensor

INTEGRA Bespoke Lighting
11-17-2008, 09:04 PM
RAB makes a 12V motion sensor, but it is only rated to 75W or so.

S&MLL
11-18-2008, 02:16 AM
James read 2nd and 3rd post

Gregabt
11-18-2008, 04:05 PM
ABT introduced a Motion Sensor for landscape lighting at the IA show. The Product senses motion and turns on lights connected to a ABT ZoneControl unit. Product will be available end of Dec early Jan.

Give me a call if you have questions.

Chris J
11-18-2008, 10:59 PM
Perhaps you should review the search feature. It seems that those of us that have used ABT are having regrets already.

DiscoverEcoLink
04-15-2010, 01:37 PM
ABT's motion control has the ability to control a single zone up to 300 Watts, or you can choose for it to control all three zones (900 Watts). The motion control can be programed to keep the lights on anywhere between 5 and 60 min. The motion sensor is completely wireless, and it communicates to a receiver connected to the low voltage side of the transformer.