blazer s-10

[grasscapeinc]

Can I plow with a s-10 blazer, and how much?

[Alan]

That depends, do you have the 4.3 and auto? For what it's worth, I'm running two S-10 short wheelbase pickups with 8' Sno-Way plows and loving it.

[BillNero]

Alan,<p>Did you say 8' Snoways on S10? I'd love to know how the trucks are holding up. I have many people ask me what plow for a snoway and as I'm not a Snoway distributor - I have nothing to offer.<p>I guess I better call Snoway!<p><p>----------<br>THINK SNOW!<br>Bill

[grasscapeinc]

2000 blazer 4.3 auto w/trans cooler?<br>How do I contact sno-way<br>Website?

[plowking35]

You will have a hard time finding a sub frame for that s-10. The feds are making it tougher on the makers all the time and the first thing that went was front axel rates. When that went so did plows. You may be able to adapt a frame from a mid 90's s-10 but I am not sure.<br>Dino <p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org

[Alan]

Grasscape, I'm not sure about the new ones, mine are the older versions, 88 & 91. I don't think the newer models will tote the load in this respect. Bill, so far no problems with the mechanicals. Other than the axles the drive train is the same as the big pickups. I think the lighter wieght makes the torque loads on the axles light enough that they hold up ok as well. The 8' Sno-Way is about the same weight as the 6' 6&quot; Fisher so no real big problem there. I've thought about putting Timbrens on at some point. Only problem I have had has been frame cracking where the frame arches over the front suspension. I built the subfrmes and nosepieces for both of these trucks and plan to add a brace from the subframe back to the truck frame to take the flex out and that should cure it. For a small truck they push real good, as much as a full size. The limiting factor is the amount of snow you can carry on the blade anyhow. I'm looking at a 6'8&quot; Sno-Way that I will remodel into a pull plow that will angle. If it works out it will be riding on the back of the 88 this winter.

[John DiMartino]

My backup truck is an old 84 S10 excab with a 6'6&quot; fisher MM plow.I know the truck can push the snow,but Im not sure of your front axle weight rating.Look on the drivers door,its there youll find it,go weigh it at a certified scale ,and see whats left to play with,if its at max now,forget it,but if youve got 600-900lbs left Id mount a snoway up to it.I know for a fact that GM leaves a nice big saftey margin in there ratings ,since we tend to overload them just a little,so I think youd be OK.If you have a 2dr youll need some weight in the rear to keep it on the ground,it gets light in back.the worst thing that could happen is GM would see the plow frame and void the warranty on the front end and possibly the trans.I doubt youll have trouble with either in 3yrs or 36K.those little S10 's push excellent,im very impressed with my old one's pushing power.<p>----------<br>John D<br>

[OBRYANMAINT]

i had 91 s-10 for a spell 4.3 auto meyer two meter w/ wingsfor light 2 to 3 inch snows it was like having a plow on a sports car stopped and started quick maneauveribility was tops all w/ plow on<br>but then when it snows 3to 4 or greater and it real wet snow the truck cannot get enough traction could have loaded it up do not think it would have helped great back up or spare truck or small route but frontlines need to be full size or bigger<p>doug

[Alan]

Doug, I think you needed better tires on that S-10. Running Cooper Weathermasters we rarely run out of traction. Our last storm this year was 14&quot; of heavy snow and the S pushed as much as the big pickup. I've nver felt that I was lacking traction with those little trucks, my limiting factor is always how much I can keep ahead of the blade. As far as being out of my league in more than a 3-4 inch storm, no way!

[John DiMartino]

I second Alan,my little S10 has pushed over a ft of wet snow,and it does as well as a 3/4 ton with a 8fter,last year after a big storm we were plowing out the shop,and it was the only truck to be able to break trail around the whole shop once,I wouldnt beleive it if I didnt see it myself.the biggest problem is the little blade takes awhile to pick away at a big lot,thats why its a driveway/backup for me.<p>----------<br>John D<br>

[snow]

a 7.5'on an S10? i have to see photos to believe this. especailly in wet new england snow? alan- you have to send me photos of them in action(if you have them) cause i'm not really trusting the power of an S10 to push a full blade of wet snow.do the blades tend to trip when you're pushing a big load?<p>Bryan<p>----------<br><br>&lt;a href=&quot;http://www.snowplow.web.com&quot;&gt;The Snowplow Homepage&lt;/a&gt;

[Alan]

I don't have any pics of the plows in action, always too busy behind the wheel. I've found that the secret is in the tires. Two years ago we had Hakkapelitas on our full size K1500. Pricey tire with a great reputation,, not so good in real life though. We had an 8' on both the K and the S models, both Sno-Ways. The S had Weathermasters and it would outpush the K. One place you could not plow up the drive with the K, I could take a full blade uphill with the S, did it several times. This year I will try to get pics of things in action so I can prove I'm not blowing smoke. As for tripping I think they tend to trip less when the blade is full as the snow tend to hold the top in place. Worst condition for a full trip plow, in my opinion, is when you get an inch or two of wet stuff that freezes on top, that stuff will hold your plow tripped all the time.<br><p><font size="1">Edited by: Alan

[miketech]

s/10 with a 8 plow i cant

[miketech]

s/10 with a 8 plow i cant

[miketech]

s/10 with a 8 plow i cant

[miketech]

s/10 with 8 plow it will fit but i cant<br>se how it will push a heavy wet snow may<br>be in 4wd low range but i dont think it<br>can push like the full sized trucks

[miketech]

as far a mounts for s/10s fisher western<br>and meyer they will not sell complete kits<br>you have to buy in parts and pieces.with<br>the trucks having to pass cash tests.its<br>harder for the maufacters to letplows be<br>installed.With front gawr being less and<br>less every year,with pass and plow on the<br>front the front axle cannot hold more than<br>63%of the gross vec weight,air bags and anilock brakes are calabrated eith thesesw

[Alan]

Miketech,<p>Maybe you can't believe it but it just happens to be true. In four years of plowing with the S models alongside a fullsize I've never felt underpowered. Only time the S was having trouble the big one was too, inch and a half of snow that got rained on and then froze. It was not froze down, but it was hell trying to break it up so you could move it. By the way, it might help if you could write a legible post.<br><p><font size="1">Edited by: Alan

[DanG]

I plow with a 1987 S-10 and have never had any problems with it. I use a Western uni-mount 6'6&quot; You should be able to find a plow that you can put on.The old body type goes up to 94 then they went to the newer body and western makes plows for both types.Also i am very impressed with how it pushes snow up here in NY, (and the gas milage is a plus compared to a full size truck)