PDA

View Full Version : Accessories


Oasislawnman
01-13-2009, 03:40 PM
I just purchased my first Wright Stander, I got the Sentar Sport 36". I was wondering about accessories.

I really need some kind of chute blocker, I found through the web that you have a MULCHING BLOCK OFF PLATE w/ #42, #48; part number: 93460024. How do I get this? Can you buy it separate from the mulching kit? What are the cost?

Also, what do you suggest as for a leaf/gas catcher and how much are these as well.


Thanks

WrightCommercial
01-14-2009, 10:22 AM
Oasislawnman,

The current number for the mulch block off plate is 93460031, this version allows a secondary plate (93460032) to bolt into the inside front corner of the deck and rounds the corner so grass is less likely to build up. Most people just run the block off plate and the secondary piece could be added later if necessary, both pieces MSRP at about $47.00. There are three catcher fitments available for the 36" Sport, the WR200-2 (3.3cuft.), the WRJ300-3 (4.3cuft.), and the WRGGT4 (4.6cuft.). The WRJ and the T4 can both be used with the LG1000 leaf extension. The MSRP for the catchers is as follows; the WR200-2 ($206), WRJ300-3 ($227), WRGGT4 ($255), and the LG1000 ($162). All of the above accessories can be ordered through your local dealer.

Best Regards
Wright Mfg. Service Dept.

Oasislawnman
01-14-2009, 02:55 PM
Thanks for the reply.

Is there a place I can order these online or do I have to go to my dealer. The only reason I ask is the my closest dealer is an 1 1/2 away.

WrightCommercial
01-15-2009, 09:47 AM
Oasislawnman,

I know there are a few dealers that do online business, we do not, everything goes through the distributor network. If you go to Ebay and search "grass catchers" you should find a couple places to buy, I'm not sure on the block off plate it will probably have to be bought from a dealer store location.

Best Regards
Wright Mfg. Service Dept.