SKYNYRD
02-06-2009, 11:44 AM
This truck started life as a 78 1/2 ton 2wd. It's currently resting on an 81 3/4 ton 4wd drive chassis. My Dad has owned it for 21 years come this spring and, it was his daily driver/work truck for a good many of those years. Being a daily driver meant that went it broke down it got fixed and not necessarily in the best way which has lead us to rebuild the truck many times. (multiple motor and cab swaps among other things) Three years ago I started collecting parts to properly re-do the truck. Two summers ago we tore the entire nose off, changed the motor and painted the frame. Last summer we changed the cab and painted the rest of the frame then undercoated everything before bringing the truck to the shop Dad works at and finally painting it. This summer I plan to paint the frame again then hopefully use fluid film on it all.
The truck has been compared to the car from Johnny Cash's song one piece at a time. Here's the list from the current make up of the truck...
Chassis- 81 chevy 3/4 ton
Fenders- both aftermarket 73-80 style
Wheel wells- aftermarket
Hood- 79-80 GM style
Radiator support- 73-79 core with 80 headlight assemblies and chrome
Doors- 80's GM shells with 77-87 regulators, 78 door panels, 81-87 window crank handles, 81-87 arm rests
Cab- 88 1ton 2wd manual
Seats- 91 suburban captains style buckets
Seat belts- 88
Steering column- 78 tilt wheel, 81-87 steering wheel
Gas tank- 70 chevy p.u. mounted in the cab
Bed- 70 something ford stake body deck with custom diamond plate floor and custom racks
Front bumper- 90 chevy pickup, custom mounted with custom aluminum diamond plate top
Plow frame- Fisher push plates and push beam, Diamond head gear, Western isarmatic mark III pump
Rear bumper- custom (hope to replace eventually)
Motor- 4 bolt main 350 crate motor with low mileage, 4bl dummy rochester carb
Tranny- 400
Transfer case NP 205 (i think not sure)
Rear ends- GM not dana's
Lund moonvisor
Kenco running boards
Craftsman tool box
2 Buyers 18x18x18 underbody boxes
Air horn
Midland CB with Firestick antenna's
Fleet size mirrors
Many lights =)
I'm gonna mix in some newer and older pics of the truck. I'll start with some taken right after we painted it.:usflag:
The truck has been compared to the car from Johnny Cash's song one piece at a time. Here's the list from the current make up of the truck...
Chassis- 81 chevy 3/4 ton
Fenders- both aftermarket 73-80 style
Wheel wells- aftermarket
Hood- 79-80 GM style
Radiator support- 73-79 core with 80 headlight assemblies and chrome
Doors- 80's GM shells with 77-87 regulators, 78 door panels, 81-87 window crank handles, 81-87 arm rests
Cab- 88 1ton 2wd manual
Seats- 91 suburban captains style buckets
Seat belts- 88
Steering column- 78 tilt wheel, 81-87 steering wheel
Gas tank- 70 chevy p.u. mounted in the cab
Bed- 70 something ford stake body deck with custom diamond plate floor and custom racks
Front bumper- 90 chevy pickup, custom mounted with custom aluminum diamond plate top
Plow frame- Fisher push plates and push beam, Diamond head gear, Western isarmatic mark III pump
Rear bumper- custom (hope to replace eventually)
Motor- 4 bolt main 350 crate motor with low mileage, 4bl dummy rochester carb
Tranny- 400
Transfer case NP 205 (i think not sure)
Rear ends- GM not dana's
Lund moonvisor
Kenco running boards
Craftsman tool box
2 Buyers 18x18x18 underbody boxes
Air horn
Midland CB with Firestick antenna's
Fleet size mirrors
Many lights =)
I'm gonna mix in some newer and older pics of the truck. I'll start with some taken right after we painted it.:usflag: