PDA

View Full Version : Wright Stander RH 36"


bladerunners
02-23-2009, 07:13 PM
Hi, I want to know if the rear drive tire size is 18 X 8.50 X-10 NHS will work on this mower? I couldn't find the size is 18 x 8.00 x -10 nhs. Please let me know thanks

WrightCommercial
02-25-2009, 10:05 AM
bladerunners,

It should fit the rim the only concern would be how close the tire will be to the hydro lines. We do have a spacer plate that can be used that will give you an additional 1/8" of clearance its part number is 95410008 and the part number is for two plates.

Best Regards
Wright Mfg. Service Dept.

bladerunners
02-25-2009, 11:23 AM
bladerunners,

It should fit the rim the only concern would be how close the tire will be to the hydro lines. We do have a spacer plate that can be used that will give you an additional 1/8" of clearance its part number is 95410008 and the part number is for two plates.

Best Regards
Wright Mfg. Service Dept.

How much is it ? I couldn't find the part numbers that you gave me #.

WrightCommercial
02-25-2009, 12:41 PM
bladerunners,

It was recently created and not officially released yet, if you goto your dealer have them call us. The MSRP on the spacer kit is $7.44.

Best Regards
Wright Mfg. Service Dept.

bladerunners
02-25-2009, 01:37 PM
bladerunners,

It was recently created and not officially released yet, if you goto your dealer have them call us. The MSRP on the spacer kit is $7.44.

Best Regards
Wright Mfg. Service Dept.
ok got it then i will contact with the wright dealer. thanks