How to replace the electronic ignition on a Stihl 024 AVS chainsaw?

[genesis215]

I just bought a saw that needs this done on it, and the parts to repair are included with it. Just need instruction on how to do it. Thanks alot.

1997 Ford E150 Tuscany Conversion Van - 5.4L Triton V8 (235HP)
2008 5'x13' Open Trailer w. Jack & 3' Gate
52" Exmark Turf Tracer HP - 17HP Kawasaki
21" Troy-Bilt 3-in-1 Self-Propelled Mower - 5.5HP Honda
21" Troy-Bilt 3-in-1 Push Mower - 5.5HP Honda
21" Yard Machines 2-in-1 Push Mower - 4.5HP Briggs & Stratton Sprint
22" Craftsman Hi-Wheel Trimmer - 6.5HP Tecumseh
22" Murray Hi-Wheel Trimmer - 6.0HP Briggs & Stratton Quantum
Husqvarna 600CRT Rear-Tine Tiller - 6.0HP Briggs & Stratton Intek
RedMax TR2300S String Trimmer
Shindaiwa LE260 Edger
STIHL BR 600 Backpack Blower
STIHL 024 AVS Chainsaw

[RonAyersMotorsports]

Just simply remove old coil and install new one. Position new coil lined up with magnet on flywheel place a small piece of cardboard (like of the parts box) between the two and tighten and position wiring back like the old. Your done.

[mowerknower]

Yeah, not quite sure what the question is. Just take the starter off, pop the coil off and put the new 1 on with .010 gap. To my memory the 024 only used 1 coil and it was always electronic ignition so you dont have to cut out the points or anything.