PDA

View Full Version : Safety-Kleen Recycling Parts Washer (Model 250)


newz7151
03-06-2009, 10:48 AM
The Model 250 is designed to meet your parts cleaning needs while also addressing concerns for reducing hazardous waste generation. This parts cleaner contains a distillation unit that provides clean solvent, as needed, by refreshing used solvent through the distillation process. When you make the determination that the parts cleaning solvent is no longer performing, you can initiate a distillation cycle simply by pushing the Recycle button! The solvent reservoir automatically pumps clean solvent back into the basin within 4 minutes from the time the Recycle button was originally pushed. Emissions from the use of the S-K Model 250 are no different than those from a typical vat parts cleaner.

(link to the page with specs)

http://www.safety-kleen.com/CustomerCenter/shopnow/Pages/ProductsDetailParts.aspx?ItemID=6523

This has been lightly used as far as parts washers go. Located in the central Texas area. Not a light piece of equipment, but could probably load into the back of a truck with the forklift.

Asking $1,500 and it comes with whatever amount of solvent is currently in it.

This would be good for a medium sized multi crew company that does their own "in house" equipment and vehicle maintenance and repairs.

Please contact just by PMs as I cannot post our phone number here.