Lawn Solutions Open Houses

[LawnSolutionsCP]

To view our new Aerators and Seeders in Person. We will be attending the following dealer open houses this spring.

Call the dealer for details and locations. If you dealer is not listed, email me and we will contact them to see if we can show our products.


March 11 - Schmidt's Seraphins; Waterbury, CT
March 12 - Gano's Power Eq; Colchester, CT
March 13 - Morgan Power Eq; Halifax, MA - demos only (Call Joe at Morgan)
March 13 – Dickens Supply; Nashville, TN
March 17 - Turf Depot (Ganz Power Eq); Salem, NH
March 17 – Chilton Field Day; Nashville, TN
March 18 – Chilton Field Day; Nashville, TN
March 18 – Scott’s Power Eq; Arnold, MO (St Louis)
March 19 - Signal Pro Eq; West Saint Paul, MN (Tenative)
March 26 - MacAllister Eq; Indianapolis, IN
March 27 – STI Turf Care; Colfax, NC
March 28 - Re-Power; Indianapolis, IN
April 3 – Norfold Power Eq; Wentham, MA
April 20 – Power Eq Plus; East Hampton, NY
April 21 – Power Eq Plus; South Hampton, NY


This is what we have so far, but the list is getting longer every day.

You can email me at:

david.cook@lawnsolutionscp.com

Thanks

David

[LawnSolutionsCP]

Wrigth Implement - Owensboro, KY
Call ahead - this is a field day at the county fair grounds.
March 19th

[humble1]

To view our new Aerators and Seeders in Person. We will be attending the following dealer open houses this spring.

Call the dealer for details and locations. If you dealer is not listed, email me and we will contact them to see if we can show our products.


March 11 - Schmidt's Seraphins; Waterbury, CT
March 12 - Gano's Power Eq; Colchester, CT
March 13 - Morgan Power Eq; Halifax, MA - demos only (Call Joe at Morgan)
March 13 – Dickens Supply; Nashville, TN
March 17 - Turf Depot (Ganz Power Eq); Salem, NH
March 17 – Chilton Field Day; Nashville, TN
March 18 – Chilton Field Day; Nashville, TN
March 18 – Scott’s Power Eq; Arnold, MO (St Louis)
March 19 - Signal Pro Eq; West Saint Paul, MN (Tenative)
March 26 - MacAllister Eq; Indianapolis, IN
March 27 – STI Turf Care; Colfax, NC
March 28 - Re-Power; Indianapolis, IN
April 3 – Norfold Power Eq; Wentham, MA
April 20 – Power Eq Plus; East Hampton, NY
April 21 – Power Eq Plus; South Hampton, NY


This is what we have so far, but the list is getting longer every day.

You can email me at:

david.cook@lawnsolutionscp.com

Thanks

David

You forgot the R
TUrf Depot (Granz)

[rcreech]

David,

Remember to stop and see me when you are in the Dayton area next time.

I have money burning a whole in my wallet for one of your new aerators! :laugh:

SERIOUSLY...be sure and call or PM me!

Thanks,
Rodney Creech

[snowman 2008]

David
Your unit is it a slit seeder ? Sorry if that sounds like a dumb reply.
The unit looks looks bullet proof
Were are the aerators on your web site?
Do you have any dealers in Ontario, would like to see one in person.

thanks
Paul:canadaflag:

[fl-landscapes]

that seeder is also a great machine for removing thatch. I'll post a pic of a zoysia lawn we verti-cut this week.

[fl-landscapes]

Lawn Sollutions Seeder - Verti-cutter

[LawnSolutionsCP]

David
Your unit is it a slit seeder ? Sorry if that sounds like a dumb reply.
The unit looks looks bullet proof
Were are the aerators on your web site?
Do you have any dealers in Ontario, would like to see one in person.

thanks
Paul:canadaflag:


It is a slit seeder on STEROIDS! They can cut a groove in hard clay 1.5" deep at 3 mph. They are the fastest, most powerful, most productive, and easieste to use seeder on the market. With the hydrostatic drive, they can even be used with a ride-on sulky.

Why so fast and powerful? Productivity = $$$

They are also great for leveling our rough lawns. They will break ground like you can't appreciate until you try one.

In Canada, Turf Care Canada (Toro) and G.C. Duke both carry them.

David

[LawnSolutionsCP]

that seeder is also a great machine for removing thatch. I'll post a pic of a zoysia lawn we verti-cut this week.

We made you a custom reel setup w/ 3" blade spacing for verticutting zoysia lawns. How has it worked? Also, how is the productivity of the 30" machine.

[fl-landscapes]

We made you a custom reel setup w/ 3" blade spacing for verticutting zoysia lawns. How has it worked? Also, how is the productivity of the 30" machine.


That's the reel with the three inch spacing at work in that photo. It works great! Verti-cut three lawns 1 Zoysia and 2 St. Augustine. Then switched out the reel to the more narrow spaced reel (think it's 1.5") and renovated someones lawn tilled it down at max setting and prepped it for sod.......little more than half day of work. All lawns were small Aprox. 5000 sq ft. Had some drive time between the jobs. This machine is fast. I'd love to have a smaller one to compliment the 30" to accommodate tighter spots.

[1wezil]

sweet :cool2: