PDA

View Full Version : Hall of Shame contribution


bcg
03-17-2009, 12:25 PM
This is from one of my regular maintenance accounts. System was self-installed by the previous homeowner and really needs to be pulled out and started over but it's not in the budget so we milk it along as best we can. When I first started working this one, I had to replace 2 AVB's that were left pressurized 24x7 with PVB's (never took pictures of that). The valve wires on them were just hanging loose. Anyway, here's one of my favorite parts of the site. Popups on the left side, watering the grass on the right side.

Who says there's a water shortage?

ARGOS
03-17-2009, 12:49 PM
Saw this one the other day. Pipe on the ground in a grid work with sprays, rotors, and impacts. I don't think it was glued because it was in multiple sections.

I didn't leave my card.

Wet_Boots
03-17-2009, 01:07 PM
Digging is just soooooo hard....

Junior M
03-17-2009, 05:58 PM
Digging is just soooooo hard....
Yeah, why tear up your perfect yard when you can just set it on top of the ground.. ;) :rolleyes:

Mike Leary
03-17-2009, 06:27 PM
Perfect example why I never had any advertising on my trucks, whoops, wrong adress. :dizzy:

Waterit
03-17-2009, 10:13 PM
I thought rocks didn't need water...

DanaMac
03-18-2009, 01:01 PM
Here's one my tech just sent me over the phone. 1" Febco 765 PVB. 3 poppets inside. Or, one full poppet, and two bottom halves that were broken, and layered beneath the top one. Hmm..... think that might limit the flow at all. And on top of the canopy written in marker, said "Do Not Touch"

Wet_Boots
03-18-2009, 01:35 PM
Who knew that Febco had a tri-poppet model? :)

WalkGood
03-18-2009, 04:19 PM
That's a "Take-a-Poppet/Leave-a-Poppet" dispenser model.

WalkGood
03-18-2009, 04:21 PM
Digging is just soooooo hard....

Makes winterizing a simple matter of just picking up the pipe and let it all drain out. Or just gather it all and store it in the garage.