Need help with striping a new lot

[AsphaltProtection]

I was wondering if anyone would help me out with laying out new parking lots. For example lengths and widths. . . .how many handicaps are needed per amount of regular parking places. . . . . .and anything else that would be helpful.

thanks

[shepoutside]

As I'm in Canada, I can't help you with the codes there. Do you not have a plan, or blueprints to work off of? If not, make sure the contractor, or owner signs off an a plan first.

The general norm, is 9' wide, 18' long, 24' drives ( normal for my striping up here)

Hope this helps

[EWS]

18x9 is standard as for handicaps 1 for every 25.... if it is your first time good luck, make sure you use chalk lines and either go right down the middle or try to follow the line as good as you can.. use a sq and make sure everything is lined up.. and make sure your front wheel is not un-alligned...

[AsphaltProtection]

Ok, thanks for all of the help. I have done restripes before after sealing a lot, but this customer was wanting to change the layout because he didn't have enough handicaps.........Thanks again!!!!!!