PDA

View Full Version : My new toy


JaysLawns
03-30-2009, 01:54 PM
Here it is just picked it up couldn't pass up on this good deal. Its a 2008 Exmark Lazer As with the 25 Kohler and the Ultracut deck. Im going to get a suspension seat for it and that should be it. We had to assemble it together but was pretty easy. Me and my friend also waxed it and put tire shine on it. I am very anal about my equipment. Thanks and let me know what ya guys think?

Jay

Coastal Lawn Maintenance
03-30-2009, 02:02 PM
looks good. what assembling did you have to do to it

JaysLawns
03-30-2009, 02:10 PM
rear tires, roll bar, seat, control levers, air filter cleaner

IntegrityGuy
03-30-2009, 02:36 PM
If you dont mind me asking, how much did it set you back? and how much did you save by assembling it yourself?

mikeg1005
03-30-2009, 02:49 PM
Very nice!

JaysLawns
03-30-2009, 06:44 PM
$7500 shipped to my door

tom's lawn care
03-30-2009, 06:49 PM
That looks great! what did you use to wax that puppy, it looks better than brand new.

South Florida Lawns
03-30-2009, 06:55 PM
Good luck keeping it that clean. The best way to keep powder coat shiny is some good ol' soap and water. Then spray the machine down with some WD-40 and use a rag to wipe the rest of the machine.

tom's lawn care
03-30-2009, 06:56 PM
Don't you mean spray it down with fluid film instead of wd-40. LOL

EagleGrounds
03-30-2009, 07:15 PM
Good luck keeping it that clean. The best way to keep powder coat shiny is some good ol' soap and water. Then spray the machine down with some WD-40 and use a rag to wipe the rest of the machine.

bad idea :P WD-40 will make bearings go bad ALOT quicker. Id go with some classic dripping oil for moving parts and REAL silicone for a good shine that will protect, not the aerosol crap.

I just waxed and tire shine my walk behind :P

Lakewlc
03-30-2009, 08:14 PM
great looking mower

4.3mudder
03-31-2009, 12:26 AM
Nice, same this as mine, jsut 10 years older with 3000 more hrs and does not even compare to look like that. Very nice, still a great price, compared to the 2009 prices.

JaysLawns
03-31-2009, 11:38 AM
We used the eagle one nano wax, very impressed with that product, thanks for the comment guys.

flatlander42
03-31-2009, 02:05 PM
is that a 60"?

Looks Great!

teamgreendude
03-31-2009, 03:07 PM
hey jay is that an anderson/scotts commercial spreader if so i'm in need of one before my old lesco push spreader gives out i need one do you happen to know were they sell them it would be much appricated thanks. James

GracesLandscaping
03-31-2009, 03:42 PM
7500 shipped to your door is a pretty good deal! this should serve you well! The one im looking at buying is exactly like that but a 27 kawi. its 8000 but since its in state id have to pay taxes too :/

JaysLawns
03-31-2009, 06:30 PM
You probably mean a 28 Kawi, I went with the 25 Kohler because its a bulletproof engine and yes its a 60" I bought that spreader from Nebraska Turf, its a local company around here and just go to andersonsgolfproducts.com and click on distributors and put kansas.

Jay

RLS24
03-31-2009, 06:40 PM
looks nice! hopefully you're dealer doesn't give you any problems if you need to bring it in for any warranty work since you "assembled" it yourself. Shouldn't have any problems though, those are great machines! good luck with it!

bobo316
04-06-2009, 03:32 PM
i just bought a exmark hp 52" for 7,000. is that a good deal?

2brothersyardcare
04-06-2009, 03:47 PM
gotta love exmarks

Jimslawncareservice
04-06-2009, 03:50 PM
i just bought a exmark hp 52" for 7,000. is that a good deal?

i bought my 08 23/52 for 7100. i saw a 08 for 6400 a dealer close out.