Dtoms
04-21-2009, 08:58 AM
Kohler ch 20s 64510 in a grasshopper 720k 461271.
At idle acts like only running on one cylinder. This unit has the CD ignition with no SAM unit. The unit has 150 to 160 compression on the cylinders.
I pulled the shroud off and checked the wires,both wire show voltage to them ,also checked for resistance. Ok. I did the timing light test on the engine and the left cylinder timing mark did not line up with the left cylinder.
Could this ignition module be my problem. It shows spark but the plug is not hot when I remove it from the cylinder.
Thanks
At idle acts like only running on one cylinder. This unit has the CD ignition with no SAM unit. The unit has 150 to 160 compression on the cylinders.
I pulled the shroud off and checked the wires,both wire show voltage to them ,also checked for resistance. Ok. I did the timing light test on the engine and the left cylinder timing mark did not line up with the left cylinder.
Could this ignition module be my problem. It shows spark but the plug is not hot when I remove it from the cylinder.
Thanks