Taking blade off a 21" Toro push??

[4curbappeal]

I cant get this thing off for the life of me! I am turning it to the left to loosen- I hope(opposite direction of the way the blade cuts) , but nothing. Am I turning it the wrong way? Just sprayed some pb blaster and thought I would ask you guys! Any suggestions?Thanks!

[Greenwrench]

Yep. Lefty loosey is correct. The PB Blaster might help, but there's nothing like a good 1/2 inch impact gun with a six point socket. Sometimes I've had to carefully heat the nuts/bolt to get them loose. Disconnect the plug wire or you might trim your nails!

[4curbappeal]

Thanks everyone! I thought I was loosening, but turns out I was tightening!!!:hammerhead::hammerhead::hammerhead::hammerhead:

The rain must have me confused!!