PDA

View Full Version : PJ Dump Trailer...your thoughts?


Travis E
05-01-2009, 08:58 PM
For those who own a PJ, what do you think of them quality wise. I'm looking at the medium duty 78" x 12'. I think i was quoted around $5700 for it, reasonable? Post pictures if you have any also.

brownsallseasonlandscape
05-02-2009, 11:53 PM
I love mine best money we ever spent. Hands down and get the scissor hoist. Quality is the best out there.

Merlin300
05-05-2009, 05:08 PM
http://i188.photobucket.com/albums/z248/19Black19/DSC00001.jpg

Here is my 14ft P.J. It has been excellent in every way, but one. The bearings they use suck! The bearings on the front axle went out with less than 1000 miles. I replaced all them with Timpkins and all has been well since. I would buy another.

grandview (2006)
05-05-2009, 05:22 PM
I like mine too.

Shack
05-05-2009, 06:39 PM
I like mine to.

lawnproslawncare
05-05-2009, 10:45 PM
We have a 24' flatbed with hyd dove tail. That thing is built like a tank let me tell you. Money well spent

Travis E
05-05-2009, 11:51 PM
Good to know everyone has had good luck with them. Mine should be in tomorrow or Thursday, this one http://www.pjtrailers.com/detail.cfm?ID=D2 for $6k out the door.

flairland
05-07-2009, 03:21 PM
Best dump trailers around IMO

grandview (2006)
05-07-2009, 08:12 PM
Only thing you need to watch out for is the rear fender. I had a load in it and when I went to dump it the fender went into the tire ,so I cut it off.

Travis E
05-07-2009, 10:42 PM
Thanks for the warning, i'll look at it tomorrow to see if its the same way.

Chairmnofthboard
05-27-2009, 06:40 PM
Only thing you need to watch out for is the rear fender. I had a load in it and when I went to dump it the fender went into the tire ,so I cut it off.

I've seen it happen MANY times. What happens is you probably backed into something at the dump. That pushed your fender in, then when you went to dump and pull away, it rolled the fender. Usually how it happens.

Quick "after the problem fix", short mud flaps. They are legal and work great. :)