PDA

View Full Version : Replacing lazer z pto clutch


Thunderbolt
05-10-2009, 09:26 PM
Hi all, How hard is it to replace the pto clutch on a Lazer Z with a 27hp Kohler? :)

Thunderbolt
05-11-2009, 07:00 AM
Bump:usflag:

Thunderbolt
05-12-2009, 07:07 AM
Anybody?:confused:

Breezmister
05-12-2009, 09:58 PM
Anybody?:confused:

It's not hard once you get the hardware out of the way, take the belt off, and the bolt off, wire disconnected. If you are lucky, you can just pull it off.
If you are not lucky, you might have to pry it off

Thunderbolt
05-12-2009, 10:15 PM
Thanks for the info:)

mowerknower
05-12-2009, 10:47 PM
Yep, if it slides right off its easy. If its seized to the crank it can get a little more difficult. Just remember, you are replacing the clutch so dont be afraid to destroy it.