PDA

View Full Version : HELP toro proline belts


vortec5.7
05-14-2009, 11:24 AM
i have a 52 inch toro proline floating deck that the belt that powers the blades snapped on and i need a picture of the routing of the belt thank you im doin my properties with a 21 inch right now:hammerhead:

Restrorob
05-14-2009, 12:10 PM
Had you read this first; http://www.lawnsite.com/showthread.php?t=144040 and posted numbers you'd be looking at a diagram right now instead of reading this. Maybe someone else will chime in with one ?

vortec5.7
05-14-2009, 01:33 PM
sory on the deck the model is 30152 and i cant read all the serial it starts with 00 and i no it is a 1990 and on the mower the model is 30111 serial 50986

Ruben Rocha
05-14-2009, 02:40 PM
Just visit toro.com and lookup parts/manuals
Here is a url to a manual for your deck you stated.
https://landscapersolutions.toro.com/portal/server.pt?space=CommunityPage&cached=true&parentname=CommunityPage&parentid=1&in_hi_userid=19462&control=SetCommunity&CommunityID=232&PageID=19524#manualsResultPage

vortec5.7
05-14-2009, 02:55 PM
thanks i looked but it doesnt show me the way the bets are routed if some one has the same or similar mower i would be grateful if they could take a picture of the deck

Ruben Rocha
05-14-2009, 03:16 PM
I see page 7 in the PDF operators manual shows the belt paths.

vortec5.7
05-14-2009, 05:23 PM
thank you for finding that im not to smart when it comes 2 computers :dizzy:

Ruben Rocha
05-14-2009, 05:30 PM
Well it is a little hard to find and for older machines you have to browse thru a few models because they want you to buy the manual for older units. But this should be close to what you need.
But I would think also the toro dealer you bought the belt from would have assisted you on the routing .
At least they would where I am .
And BTW there is a Toro forum here. Supported by Toro.