View Full Version : Snapper Help

05-16-2009, 01:28 PM
Hi first post here after doing some research on these forms I just bought a new 21 inch Snapper Commercial Hi-Vac Kawasaki mower . I also bought the ninja mulching kit ( not the plug ) my question is can I unbolt the recoil and turn it so the rope will exit from the back . As when I remover the bagging system it also removes the little wheel that holds the rope out so now the rope comes out on a terrible angle making it almost impossible to pull over . Any advice would be great , Thanks

05-16-2009, 04:59 PM
If you have the FJ180 engine it looks like it may be possible, Just remove the four screws and give it a try......

05-16-2009, 05:41 PM
Thanks I'll give it a try just thought I'd ask as someone must of went from a Hi-Vac to a mulcher and came across the same problem . If it don't work I'll have to buy a recoil from the mulch model where the rope does exit from the rear .