PDA

View Full Version : is my clutch going bad


CLARK LAWN
05-17-2009, 07:37 PM
i have a toro z 500 every now and then when i try to engage the blades it hesitates some time i will have to try it a few times before the blades start up. does this mean my clutch is going or is it some other problem.

Restrorob
05-17-2009, 07:42 PM
There may be nothing but a adjustment needed, Take a look at this post; http://www.lawnsite.com/showpost.php?p=1463590&postcount=2

BigGreen1
05-20-2009, 10:00 PM
Clark,

Resto-Rob is the master on here.

I did want to tell you that I had a similar problem and it was related to my safety switch on handlebars not making when I had my hand on left ecs handle.

Tim

Jason Rose
05-20-2009, 11:17 PM
I don't know if toros use adjustable clutches... I know many brands don't use clutches that are adjustable. My grasshopper clutch isn't adjustable, and it's doing the same thing. It has about 950 hours though... and I abuse the clutch.

swandrie
04-23-2010, 10:12 AM
could be the battery too!