PDA

View Full Version : Exmark Lazer Z not engaging blades


12Valve
06-01-2009, 02:03 PM
Started mowing thismoening and noticed that when I enguaged the blades it acted a little diff like not bogging down the mower as much, just a minute ago I went to lift the deck up to mow over a rock and she quit tuning them. I didn't hit the rock something broke before I got to the rock. Ive been enguage/dissenguage at 1/2 throtte like it says. Any idea's all belts are on go to pull the yellow knob and I get notta.

THEGOLDPRO
06-01-2009, 02:38 PM
could be the yellow knob, i had one go bad one time on me, and it wouldent engage the blades, could also be the clutch, how many hours are on the machine?

12Valve
06-01-2009, 04:17 PM
68.8 hours I took it to dealer thisafternoon. Hopefully know something tommorow

DT Lawn Care
06-02-2009, 05:51 PM
Check your fuses. It should be one of them. If not, probably your switch, or unfortunately, your clutch.