PDA

View Full Version : rebuilding a wheel motor


G. Ramey
06-09-2009, 01:04 PM
I have a wheel motor that is getting weak. I am going to rebuild it myself. Does anybody have any experience or recommendations they would like to share. My wheel motor is a white ce12. Thanks.

Pumper
06-09-2009, 03:37 PM
I would call 800-323-7298 and ask for either Dick Zachary or Charles Knight. They can get you the parts you need and refer you to a local White distributor who can order you the parts. You are looking at 45 minutes to an hour for the actual tear down and rebuild on the wheel motor plus whatever time you will have removing it from the machine and putting everything back together. Make sure you get the shaft bearing with the seal kit. It is very easy to damage the bearing when getting the shaft seal out.