JD757 Ztrak w/25HP Kaw Wiring Question

[scarfie]

Had to rework the wiring connector on my 757 that connects the engine whip to the console whip. This connector plug can accommodate 6 connections, but mine only utilizes 4. Believe I reassembled it incorrectly. The engine starts/runs good, but my oil & battery/charge lights don't function correctly. Anyone have a wiring schematic they could share with me? Or, could someone look at their ZTrak & confirm the wiring pairs as they meet in this junction? The wiring connector separates into two pieces; one clear plastic coming from the console, the other black plastic, coming from the engine (I've attached a couple of reference photos & attempted to document the layout of this connector using ASCII art below. X=wire present, 0=no wire present)


-------
| x x |
| x x |
| o o |
-------


Wires coming from engine into black connector
=============================================
1 Yellow (connects to voltage regulator)
1 Brown w/silver stripe (oil sending unit)
1 Black (connect to coils)
2 Green wires terminate on one post

Wires coming from the console into clear connector
==================================================
1 yellow
1 creme color w/600 printed on wire
1 creme color w/610 printed on wire
2 White wires terminate on one post

Can someone please help me confirm proper matchups? Thanks in advance for your help.

[scarfie]

Posted a couple of reference photos on this electrical connection.