PDA

View Full Version : Looking for a certain brick light


curry
06-16-2009, 11:10 PM
I saw in Construction magazine awhile back lighting that is installed in the mortis of the brick. It has a L-shaped lip that goes in the cement. I cant find it anywhere now. Can anyone help me out with finding it? It was advertised in the Construction magazine 4-5 months back I think.

curry
06-16-2009, 11:23 PM
Nevermind. I found it. It was the Vanguard.

TXNSLighting
06-16-2009, 11:26 PM
Ha i was about to say, sounds like the Vanguard.

JoeyD
06-17-2009, 10:47 AM
watch the Vanguard video here!

http://www.youtube.com/watch?v=ndAL1F4_WZE

curry
06-17-2009, 12:24 PM
I cant find any prices. What is the price of the Vanguard 8?

JoeyD
06-17-2009, 12:40 PM
curry, email me at joey.digiovanni@uniquelighting.com and I will email you our list price sheet.......I will PM you the list prices.....

curry
06-17-2009, 01:16 PM
Thanks for the price list. Its out of my budget though.

JoeyD
06-17-2009, 01:25 PM
No worries!!!

Pro-Scapes
06-17-2009, 02:25 PM
Im going to chime in with an idea. In a somewhat permanant mounting such as into brick or under a lip which would basically entail deconstructing the wall to replace components is NO place to go with a cheap fixture.

Please try to do yourself a favor and arrange the budget to use a quality piece. I can promise you that tearing that wall apart because you used a second rate fixture is going to cost alot more than doing it right the first time.

This is just my outlook on the situation. Take it as you will.

curry
06-17-2009, 03:35 PM
You are correct. I can get others that are very high quality for 30% less. Because I will need 1K worth, saving $300 is a good idea as long as you get the same quality.

Pro-Scapes
06-17-2009, 03:51 PM
Make sure you check with a dist before you take the price Joey gave you.

JoeyD
06-17-2009, 05:03 PM
the prices I gave you are list and contractors will get a substantial discount off of that price......just FYI.....

curry
06-17-2009, 05:33 PM
OK, then can you pm me the contractors price or do I need to find a dist that can help me out?

JoeyD
06-17-2009, 05:42 PM
Distributor...in Texas you can obtain our products from any John Deere or you can contact Scott Jackson of Goya Lighting in Austin who carry's heavy inventory of our products and his number is 512-433-9551cell 512-266-1804office

klkanders
06-17-2009, 08:31 PM
Geez Joey!
Why didn't you tell him your prices were list in the first place.......:)

Keith

Tomwilllight
06-17-2009, 09:59 PM
Sorry, but did I missed something here?

It seemed to me that curry has determined that he has $1000.00 to spend on lighting to be install in a masonry wall. He's now looking for the best price for quality so he can spend his 1000.00.

Where was the conversation about application? Curry, what do you want the lights to do when you install them?