PDA

View Full Version : Blades

jdutcher003
06-23-2009, 04:59 PM
What kind of blades would you guys recommend for a Ferris gear drive walk behind? Just looking for a little input
sven1277
06-23-2009, 05:09 PM
Sharp ones
jdutcher003
06-23-2009, 05:14 PM
would have never guessed that:hammerhead:
gene gls
06-23-2009, 09:29 PM
What size blades????????????????
dwlah
06-23-2009, 10:32 PM
[QUOTE][/Sharp onesQUOTE]
and ones that fit

Beat to the smart remark again*trucewhiteflag*
jdutcher003
06-23-2009, 11:17 PM
its a 48 inch deck. All I know is I need 3 Blades, but not sure what size. they should all be standard for a 48 inch deck right?
gene gls
06-24-2009, 07:39 AM
its a 48 inch deck. All I know is I need 3 Blades, but not sure what size. they should all be standard for a 48 inch deck right?

NO..........It depends on where the spindels are mounted on the deck and how much over lap is allowed in the setup. Measure your blade from tip to tip to get the length, also whats the hole size....
mowerdude777
06-24-2009, 11:16 PM
I have a ferris gear drive and put gator blades on it and it works like magic