PDA

View Full Version : Wanted: Old Equipment


edub32
07-01-2009, 11:40 PM
If anyone has any used equipment that they don't use any more I would be interested in buying them from you.

Looking for straight shaft string trimmers
Blowers
Stick Edgers

Would prefer Kaw, Stihl, Redmax.

accuratelawn
07-02-2009, 07:37 AM
I have tow Shindaiwa trimmers. Where are you located?

edub32
07-02-2009, 09:34 AM
Located in Pickerington, Ohio 43147.

edub32
07-03-2009, 04:18 PM
Anyone? Still looking...

LB1234
07-04-2009, 09:58 AM
have an old echo trimmer..still runs but need some work. just sittin in the shed. Also have a redmax trimmer...beleive the carb needs to be replaced. Have two little wonder push blowers. one is a 5 hp (2002 or so) and the other is a 6hp. The 5hp has flat tires but other than that is fine, just doesn't run. Also have 6hp but some of the engine is in pieces. believe its a 02 or 03. Also have a cub cadet WB edger with a little briggs engine. Ducted tape handle.


All this equipment did run we just upgraded to larger equipment (it is what we started with). Have no idea what I'm looking for ($$$). I guess if you have any interest just send a PM and we can go back/forth over email.

edub32
07-05-2009, 03:42 PM
PM's sent!

crawford_d
07-05-2009, 04:03 PM
I have a GA-30 Plugger that has not been used fora year. Has newer engine with 200 hrs. on so should be good fora long time. It is in th eshed with lots of stuff piled in front of it. It does look pretty good for and older machine. Located in Iowa and 1900.00 will buy it. 563-880-7940

lyube
07-05-2009, 07:35 PM
Have 5 commercial running and working redmaxes for sale.

lyube
07-05-2009, 07:36 PM
I have 5 working redmax trimmers for sale.

Redmax #1-65$ I cleaned this up, cleaned out the carb and it runs and cuts good. GZ25n model engine, I beleive BCZ26XX trimmer model

http://i517.photobucket.com/albums/u339/kcimb/100_0906.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0907.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0908.jpg

Youtube video of it running:

http://www.youtube.com/watch?v=fpxWzQ_zj5g


Redmax #2-65$ GZ30n model engine. Runs good and trims fine. BCZ3000

http://i517.photobucket.com/albums/u339/kcimb/100_0917.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0913.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0914.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0915.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0916.jpg

youtube video of above trimmer running:

http://www.youtube.com/watch?v=SztN-k8SuIo

Redmax trimmer #3: 40$
a few days ago when I replaced the fuel tank and lines but doesn't want to start now. You can fix it and pay less or I'll fix it. gz30n1 engine, BCZ3000 model

http://i517.photobucket.com/albums/u339/kcimb/100_0920.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0919.jpg

http://i517.photobucket.com/albums/u339/kcimb/100_0918.jpg

There are 2 more that I am fixing. They are getting cleaned up and need new pull starts.

I'll post them a little later.

I prefer cash, face to face. I might be able to arrange shipping, but point me in the direction I should go. I beleive shipping a trimmer would be an ungainly proposition.