View Full Version : parting out 1999 dodge ram 2500 4x4

07-13-2009, 09:38 AM
any one need any parts to fix there dodge up?

let me know i got another dodge and need some parts off this one so im just parting the whole thing out

it has a messed up tranny only goes forward (good for a rebuild)

5.9L motor runs good but rusty

body is pretty much shot with rust front and rear bumpers might go on my other truck (if they do i have a brand new black front bumper that just needs the plastic id sell, the rear one is shot which is why im thinking about just replacing both to have chrome front and rear)

axles are good, lights are good, tail lights good, lots of interior parts are good

dash is cracked cup holder thing that keep it level are broke

let me know what you need im not shipping the bigger stuff (like motor, tranny, axles, not shipping them pick up only)

but alot of the other smaller parts i can ship

only thing that is gone is all the plow set up (thats going on the other truck) grill, and maybe front and rear bumper


cutting it short
07-13-2009, 08:37 PM
what does the seats look like ? i have a 1996 dodge seats are ruff lookingfor some.

07-13-2009, 08:40 PM
um there not the best drivers has a rip passengers is good middle is good but drivers has a rip

cutting it short
07-13-2009, 08:58 PM
okay thanks for your time

07-14-2009, 08:05 PM
any one need any thing? motor is being pulled this week and then not sure how long im gonna keep it so get your parts asap

cutting it short
07-14-2009, 09:14 PM
how much for the wheels and rings

07-14-2009, 09:36 PM
How much for the motor?

07-14-2009, 09:44 PM
what rings? $125 for just the rims and tires $175 for rims and caps

$500 for motor its rusty but it runs good and has 137,000 miles on it

07-14-2009, 09:56 PM
Thank you. good price but I will pass.

07-14-2009, 10:42 PM
what is the gear ratio on the rear axles?

Thanks Rich

07-14-2009, 11:48 PM
thanks any ways

and the raito im not sure gotta call the dealer with the vin and see

cutting it short
07-15-2009, 12:35 AM
Sorry i meant the caps . 175 for all or each

07-15-2009, 12:47 AM
Does the motor burn oil/coolant/more than normal gas? Any knocks or pings? My 98 Dodge motor has a wicked rod knock.


07-15-2009, 01:59 AM
Whole truck? Title?

07-15-2009, 08:36 AM
175 for all 4 rims, tires, and caps

i only heard the truck run for like 5-10 mins and it seemed to be ok but its rusty i would switch every thing over from your motor on to this block and get new gaskets but thats just me

and not selling it whole cause i need parts for my truck and what dont sell ill keep around as a spare

cutting it short
07-15-2009, 09:33 PM
will you ship the wheels caps ?

07-15-2009, 09:47 PM
ya i can ship the smaller stuff but the bigger stuff i dont wanna mess with shipping

$65 shipped for the caps

07-16-2009, 04:34 PM
transmission pending any one else need any thing

Daily Lawn/Landscape
07-16-2009, 09:00 PM
How about Tail lights and tailgate

07-16-2009, 09:36 PM
tail lights are $45 shipped for both or $25 shipped each they look good

tail gate has rust on the bottom and the latch some times works

07-16-2009, 09:59 PM
hows the radio???

07-16-2009, 10:01 PM
still have the engine around?

07-16-2009, 10:52 PM
didnt i talk to you on plow site about the raido?

and the engine is still in it getting pulled now $500 it runs but its kinda rusty

07-16-2009, 10:58 PM
my engine runs to but burns oil like a mother and under load it backfires like your sitting side line in the war of 1812. get what im saying?

did the truck just come off the road? did you run it alot? ahhh never mind i can get a low mile engine for 750 up town nevermind.

07-17-2009, 12:07 AM
yes it runs good it was sitting for about a year and a half cause the tranny lost reverse and gained 2 drive gears lol (reverse and neutral became a forward gear for some reason)

its just a little rusty from plowing and no big deal if i dont sell it ill redo it and keep it as a spare for my other trucks

and do you know its low milage? did you see before they pulled it? hear it run? i had a truck with over 250k on it 2 wheel drive that the motor looked cleaner than half the junk yard trucks motors with "LOW MILES MOTOR" so just watch what you buy dont know how the yards up there are but some around here will tell you low miles and runs good and you waste all the time putting the motor in to find out there is a knock or its locked up then they tell you there is nothing they can do lol which is what the last 2 motors i sold were the same bs storys from the junk yard that nothing they can do

so i guess what im trying to say is make sure you get a warrenty

07-18-2009, 03:24 PM
What did you decide to do regarding the front bumper? I'm interested in the black bumper or the chrome one shown.

07-18-2009, 05:01 PM
i cant ship it but im gonna swap it out and use the chrome one and sell the new black bumper i have on my other truck

07-18-2009, 07:08 PM
any word on that rear axle? If you PM me the VIN # i will look it up.


07-18-2009, 11:31 PM
i cant ship it but im gonna swap it out and use the chrome one and sell the new black bumper i have on my other truck

Just realized you're 8 hours away. Wish you were closer!

I found some on fleabay which I may pull the trigger on, especially since shipping is included. (No telling on the quality). One thing I'm confused about is it seems the top and lower pieces (attaching to the bumper) have molded plastic clips made into the bumper. Sound right? Mine are all broken and the facia / valance is about to fall off. Just out of curiosity, are you selling the bumper with the valance / facia attached? If not, how did you remove them and where can I locate the replacement clips. Any help appreciated. If you want to meet half-way then by all means send me some photos and we'll make a road trip. :~) windowpro2003 [at] yahoo [dot] com.


07-20-2009, 10:12 AM
ya i dont know where you can get them clips at i always just tried to leave them on and not mess with them but there is a new black bumper that i have and it dont have the bottom part on it cause some one ripped it off the old bumper and didnt take the time to do it one by one sorry i cant really help you much but id guess only place to get them is dodge dealer or junk yard

o and i got another truck 1995 dodge ram 1500 4x4 parting it out as well

missing head lights, tail lights, tranny, t-case, tail gate, rear bumper, radiator is junk but have every thing else

07-23-2009, 10:17 AM
any one else need any thing? its getting pretty stripped

o and the axles are dana 60s both front and rear

12-06-2009, 03:50 PM
Hey. I'm looking for a complete stock suspension for my Dodge. Was wondering if you have a stock suspension. if you do please email me at dustin.ross@yahoo.com thanks dustin or call/text at 812-614-7255