2644 Wright Stander, Track Vac, Riders, trimmers, edgers, snow blowers all must go [Archive] - LawnSite.com™ - Lawn Care & Landscaping Business Forum
PDA

View Full Version : Wright Stander, Track Vac, Riders, trimmers, edgers, snow blowers all must go

K & D Lawn Care
07-15-2009, 06:17 PM
I am moving to a smaller shop and downsizing the mowing and snow removal side of my business. I have the following for sale:

3 Toro Commercial Snow blowers model CCR-3000 $125.00 each or $300 for all
3 Toro Commercial Snow blowers model CCR-3650 $125.00 each or $300 for all
The snow blowers all run fine but need about $50 each in parts to be ready for winter.

I have a 52" wright stander with a bagger. It is 5 years old and has a brand new 15 horse kaw on it late last season. No oil or hydro leaks, pumps in good working condition, again no leaks. $2000.00

I have 1 honda trimmer and 3 echo trimmers in one lot for $100 dollars. The echos are for parts and the honda runs. You could get i good working unit out of the three.

1 echo SRM-260 used trimmer runs great for $100.00

5hp commercial lawnboy 21" $100.00

MGD Sidewalk edger doesn't run needs work $25.00

Craftsman 42" riding mower with brand new 13 hours briggs motor. $200

3 old metal commercial snow blowers 24", all run good $50 each

Ariens 2 stage snow blower 36" electric start and pull start 12 horse with enclosure. $400.00 runs great

Ariens 2 stage snow blower 32" electric start and pull start $300 runs great

Truck cap for a 2002 2500 HD $100

325 Gallon water tank molded for back of pickup truck. $150

Homelite 33cc 16" chainsaw runs good needs new chain $25.00

60" Everride warrior like brand NEW only 200 hours $4,000

36" Everride Wasp like new belt driven walkbehind $1,500

Trac Vac leaf vaccum system with brand new 5 horse engine last fall for $1,000

OK, everything is in Elgin, IL and is Pick-up ONLY in cash. If you have any questions or would like to see pictures please let me know

Thanks,

Keith

edit - you can't post an email address at the site. thanks, Mike
K & D Lawn Care
07-16-2009, 01:20 AM
Ok, I tried to e-mail everyone the pictures but they were too big so I had them resized and posted here

http://www.kdlawncare.zoomshare.com/1.shtml/All%20Stuff%20For%20Sale

Hopefully we are allowed to post links to pictures and if not you can reach me at 630-863-2426
K & D Lawn Care
07-18-2009, 01:21 AM
Well I had a large response from the two ads I put up so I am having an open house Today, Saturday the 18th between 12 noon and 2pm at my shop in Elgin. If you would like to come and inspect the equipment the address is

1736 Berkley St.
Elgin, IL 60123

It isn’t too hard to find but when you get on Berkley St just look for the large statue made out of old rusty rims, that is the entrance to our industrial park.

Thanks,
Keith
K & D Lawn Care
07-18-2009, 11:06 PM
The green lawnboy, the craftsmen with new engine, the 100 dollar echo trimmer, 2 of the Toro 3000/3650 snow blowers, and the edger.
ALLPro Landscaping
07-19-2009, 01:17 PM
you have pics of the stander
K & D Lawn Care
07-19-2009, 03:46 PM
It is the only thing left to get pictures of, hopefully I will have time to get them up tomorrow.
K & D Lawn Care
07-20-2009, 02:10 AM
New pictures are up of the 60" Everride Warrior and the 52" wright stander.
cecilianolandscaping
07-30-2009, 07:16 PM
wats ur location?
4.3mudder
07-30-2009, 11:59 PM
Dam, I'd like to get that trac vac if you were closer.
miketull8
08-01-2009, 12:13 AM
were you using the trac vac with the stander?
CelticKY
08-11-2009, 10:38 PM
Is the EverRide Warrior still available?
miketull8
08-12-2009, 03:51 PM
Is the bagger for the Wright available?
jlawnman
08-12-2009, 06:27 PM
don't laugh, but I've heard of that being done. A friend of mine put a trac vac behind a great dane surfer and it worked quite well. Just fire up the back pac blower and jump and and git 'r' done
doresah
08-12-2009, 07:30 PM
give me a call at 309-660-3027. Wanting to purchase the everride wasp and a few snow blowers from you. Am local and can pick up this weekend. Hope to hear from you soon! Thanks
rusty_keg_3
09-22-2009, 06:32 PM
Do you still have the Stander?
0