PDA

View Full Version : Briggs & Stratton 6hp Please help! need parts!


matt9923
07-18-2009, 06:39 PM
I have a Briggs & Stratton 6hp. I cant finde the right numbers
On the gas tank i See.
Family- 6BSXS. 1901VH
276390 (idk what this # is)
then theirs a bar code with- 060117FA34151

I got it free in a 22" Push mower. It gave a terrible kick back and broke the starter enguone mecanism... shure enough the flywheel key was sheered. But i snapped teh flywheel in 2 pices beeing lazzy with the wrong type of puller. I had to tap my own holes in it to use teh balance puller!!. But i dont know what part numbers or modle numbers to go off.
I resat the valves and decarbones the cylinder and also need a new head gasket or i might not use it but i probly should.

Flywheel
woodruff key
Headgasket
starter engagers (The 2 while plastic things)
Its a newer engien and mower ill get soem pictures.
Thanks Matt

matt9923
07-18-2009, 06:50 PM
Ok i got soem pictures. I think i found teh mowers modle and serial
M- 917.388930
S- 042406M026998

Heres the mower
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0877.jpg

Motor-
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0873.jpg
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0874.jpg

Engines cover
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0876.jpg

gas tank
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0878.jpg

And f...ed flywheel
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0875.jpg

matt9923
07-18-2009, 07:35 PM
I just baught a flywheel and gasket off ebay.
Now i need to figure out what the starter enguage mecanism is called. One of the white things the pops out and grabs the cub broke?
What is it called?
http://i252.photobucket.com/albums/hh15/matt9923/CIMG0880.jpg

mwjrepair
07-18-2009, 08:35 PM
One of the white things the pops out and grabs the cub broke?
What is it called?

It is a starter pawl, B&S part #281505.

Wayne

Restrorob
07-18-2009, 08:39 PM
Matt,

This engine is model number 122K02 type number 05577-E1, Flip the cover over and look where marked and you will find the engine numbers;


http://i107.photobucket.com/albums/m314/Restrorob/Briggs/BriggsModelNumberLocation.jpg


The part in question is called a "ratchet-pawl", The Briggs part number is 281505S.....

matt9923
07-18-2009, 09:20 PM
Thanks i figured out the starter pawl a few minutes after i posted it....
I orderd a new flywheel, woodruff, headgasket and starter pawl.

I hope to get it running and maybe sell it. I have another free lawnmower i use for myself so maybe i can get $80-100 for this and make soem profit.
Ill keep posted on the progress.
Matt

matt9923
07-18-2009, 09:25 PM
Thanks i found the number you pointed out.
Thanks again Matt