PDA

View Full Version : 5x10 trailer


deerewashed
08-02-2009, 09:39 PM
can i fit 2 bobcat gear drive walks on a 5x10 trailer or do i need a 7x12 (the next step availible) for 600 more with a side ramp.

luis@NJ
08-02-2009, 10:00 PM
Why not get a 6x12?

93Chevy
08-02-2009, 10:01 PM
Get out a tape measure and figure it out yourself.

Not trying to be rude, but that's the only way you'll get a definite answer.

And check into used trailers, I got a 16' that needs a little work for $500. There are deals out there.

Puddle of Oil
08-02-2009, 10:24 PM
ya, it will be close but it will work! to be safe go with the 12'!

deerewashed
08-02-2009, 10:54 PM
i would measure it but only own 1 right now that i use i am getting another 36 or 48 bobcat so dont own it yet.

93Chevy
08-02-2009, 11:13 PM
i would measure it but only own 1 right now that i use i am getting another 36 or 48 bobcat so dont own it yet.

Then double the length...

STIHL GUY
08-04-2009, 12:30 AM
i have a 48'' bobcat and i could probably fit 2 on my 10ft trailer if i put them on backwards so the controls are not hanging where the gate needs to be. get a 6X12 just to be safe. youll grow into it quick

South Florida Lawns
08-10-2009, 03:43 PM
Here's what I do, find a flat floor and take a chalk line and tape measure and make a rectangle on the floor. Do it the same size as the trailers your looking at. Next park your two mowers in the space and see how the stuff fits.

BJWLAWNCARE
08-11-2009, 09:43 PM
the tighter the better. If my stuff slides around it usually breaks something. I use to fit a Ramsomes 48 belt driven a scag 48 belt driven and a 21 turned sideways. 5 x 10