Take a look at this to photos Mustang 2109 and Gehl 7810

[2109 Stang]

I found this pictures a while a go and want to share with the forum

http://www.forconstructionpros.com/interactive/wp-content/uploads/2009/03/gehl150thmachine_side.jpg
http://photos.tradeholding.com/attach/hash68/79428/mustang_pic_4x.jpg

[stuvecorp]

'Pimp my skid' and 'Redneck skid'(or Bigfoot skid).:laugh: That big tire one would be interesting to run.

[KTM]

I seen that 150 years of Gehl skid at A farm show a few weeks ago, It sure was drawing a crowd, the old mural pics on the side and the black chrome were pretty cool. I overheard a few people talking about why a company that might be going under would build such a thing.

[bobcat_ron]

Mustang was a weird company back then, they had some real goofy ideas.

[SellingIron]

That setup with the big tires is for putting in fence post in wet areas...

[WillieWonka1850]

The Gehl 7810 and Mustang 2109 are about the only machines other than their CTLs I like.
The have my favorite engine and I'm sure you can guess what it is if you don't know...

I did see that Chromed out Gehl on their site, but I've never seen that 'Stang.
They need a bumper sticker for that 2109 that says, "Who needs a CTL!" :laugh:

[2109 Stang]

A poster on the other site said that the big wheeled Mustang was clocked at 22 mph ,thats a lot of speed for a skid steer, mine goes like 14 mph with new tires and that seem like braking the sound barrier for a skid .

[stuvecorp]

A poster on the other site said that the big wheeled Mustang was clocked at 22 mph ,thats a lot of speed for a skid steer, mine goes like 14 mph with new tires and that seem like braking the sound barrier for a skid .

The first winter I plowed with a 90XT and hit that two speed, it was scary. After awhile it did slow down but plowing with two speed is awesome, would love that 22 mph.:weightlifter: