PDA

View Full Version : 48" bunton with wisconsin robin help


shutzero
08-28-2009, 07:25 PM
just bought a 48" bunton walkbehind with a wisconsin robin engine...WI-450v is the model number. we have spark, and it turns over with compression. its just not starting...any help on this?

Restrorob
08-28-2009, 07:45 PM
How many lbs. compression ?

Is there fuel in the carb ?

shutzero
08-28-2009, 08:24 PM
havent measured compression yet and there was fuel in the carb but now theres not. we poured gas right into the carb and got it to run for about 5 seconds but now it wont fire up

shutzero
08-28-2009, 09:00 PM
cleaned the carb out and got it running! blowing a lot of white smoke though...what could that be

Restrorob
08-28-2009, 09:17 PM
If the unit has been sitting for a while it could be condensation build up in the crankcase, Change the oil and let it run a while to see if it clears up.

Shasta Lake Landscaping
08-28-2009, 09:27 PM
Never seen one with a wisconsin
You should post pics.

shutzero
08-29-2009, 01:34 AM
ill get one up after i clean it and make it look all nice ;) also, were having issues with the deck being level and the wheel being all bent and stuff...seems like it might have been dropped or something

shutzero
08-29-2009, 01:57 AM
couple more questions...what weight oil should i use in this? and also, does anyone have a wiring diagram for the electric start? theres one wire coming out of the starter that isnt connected and i dont know where it goes...also, theres no battery on it so im just trying to figure out what goes where

shutzero
08-30-2009, 07:38 PM
I can't find a recoil for this thing...it's a wi450v anyone know where I can get one?
Posted via Mobile Device

Restrorob
08-30-2009, 09:10 PM
For the oil I would use 30 or 40w, As for the electrical that may be fun. I didn't see a unit listed with a W/R engine.

You can gander around HERE (http://cgcequip.arinet.com/scripts/EmpartISAPI.dll?MF&app=CGC54&TF=EmpartWeb&partner=CGCSB&lang=en&loginid=CG999996&loginpwd=2006CGC1030) at different units/diagrams and see if yours is similar to any of them. Click "Product Line" then the blue down arrow on the right, Then click "Schiller Grounds Care" then GO.....


HERE (http://www.oscar-wilson.com/MANUALS/ROBIN/WR-W1-450V.PDF) is a engine parts manual that came from HERE (http://www.oscar-wilson.com/front_page.asp) so you should be able to purchase recoil parts from them.


Good Luck

shutzero
08-30-2009, 10:13 PM
couldnt seem to find it on the site =/