PDA

View Full Version : lesco spreader


heather
04-27-2002, 11:24 PM
I bought a used lesco mark2 100lb spreader, I have no manual on proper rate settings- please help

bubenberg
04-28-2002, 09:32 AM
hi, i never carry my stuff with me. when i buy the next application at lesco they set it for me , they also help me do a test run and off i am to my lawns..... good luck

HBFOXJr
04-28-2002, 01:24 PM
Materials are so different you must calibrate the units yourself for each product you use. Keep a record of the settings and you will see similarities for future reference. The most consistent way to set them is with a gauge for the hole size available from lesco.

tremor
04-28-2002, 01:35 PM
Heather,

I work for LESCO. Send me a fax number & I'll send you a setting chart.

Another option is to call our Home Office directly.

1-800-321-5325

http://www.lesco.com/

Tell the receptionist what you need. She'll forward you to someone who can help. They can also send you a copy of the parts diagram & owners manual.

Steve

Harvestman
04-28-2002, 07:38 PM
You Can By a calibration gauge at lesco for $3.95

TJLC
04-28-2002, 08:59 PM
I just bought a new ss Lesco spreader (very nice). All I do is set it with the calibration gages that came with it, according to what it says on the bag. Very simple and accurate.

kbcjlc
04-28-2002, 09:25 PM
I bought a lesco 80 pounds but it was not a good way to use this for slope, hills etc... I use earthway which is very good. Easy to push....

Keith

KirbysLawn
04-29-2002, 02:42 AM
Try this:

http://unionturf.com/rays/lesco_spreader.htm

KirbysLawn
04-30-2002, 12:15 AM
Se if this one works: