Caster Spacing on Exmark

[Doogiegh]

On a 32" Exmark Metro, what do you guys recommend the caster spacing at?

Right now, it's 2 above the wheel and 2 below, and 2 above the blade and 2 below (factory stock)


Any fellow Exmark users out there change things around any to make it cut even "better"?

Thanks!

[TJLC]

On my Viking I run the deck on highest setting, front on highest setting and 2 spacers under each spindle. This gives me about a 3" cut. There could be better settings but this is what I use personally. What works for me may not necessarywork for someone else. Try different things to find what works best for you. Good luck.