Deck height on Grasshopper 725G2 w/61" Deck

[P. Nelson]

Do any of you Grasshopper operators know how to adjust the deck height on a 725 G2 w/61" deck? At 2 1/2" it's too low and 3" it's slightly too high. I need it to be in the middle. The threaded arms on the sides seem to only raise/lower the front of the deck. Any advice is appreciated.

[digger1]

Some brands can be "fine tuned" by adding washers or spacers between the blade and spindle housing. Check with your dealer or Grasshopper before doing this though.