PDA

View Full Version : Will a 66in'' Super Z fit in 7'?

Turfscapes
10-01-2009, 11:41 AM
Im looking at getting a 7 x 14' enclosed trailer, does anyone know if a 66'' hustler will fit ok?
Juan91
10-01-2009, 02:29 PM
looking at their website, says the total width is 67" and since 7 feet equals 84"....i'd say your good to go :)
gandk06
10-01-2009, 02:41 PM
I would say yes, but you would have to check the door opening size on the trailer. I would guess that the door frame would make the opening less than 7 feet. It might be time to invest in a tape measure.
Juan91
10-01-2009, 02:46 PM
It might be time to invest in a tape measure.i did not think about the opening :-/

:laugh:
Tq23
10-02-2009, 08:46 AM
Also, some 7 ft trailers have the wheel wells inside the trailer, making the inside dimensions even smaller. You will need to see the trailer and bring a tape measure.
LawnGuy73
10-03-2009, 09:31 AM
Also, some 7 ft trailers have the wheel wells inside the trailer, making the inside dimensions even smaller. You will need to see the trailer and bring a tape measure.

I thought that was only 8 and 8.5 foot wide trailer that the wheel wells are inside on.

We have a 61" Wright Stander inside of our 7x16 enclosed and I'd say there is atleast 10" or so of room on either side when it is centered.
LawnGuy73
10-03-2009, 09:35 AM
I thought that was only 8 and 8.5 foot wide trailer that the wheel wells are inside on.

We have a 61" Wright Stander inside of our 7x16 enclosed and I'd say there is atleast 10" or so of room on either side when it is centered.

Thinking about it further, there has got to be atleast that if not more room inside the trailer. Our 61" Stander has a Pro Vac on it, the blower unit has to be about 8 to 10" wide on it and it fits easily in the - nearly centered.
FIRESCOOBY
10-04-2009, 01:01 AM
Depends on trailer. I have a Horton (POS) 7X16. My 52" TT fits, and a 61" would fit but would be tight. NO WAY a 66" deck would fit.
bryant lawn & landscape
10-08-2009, 10:21 PM
I have a 7x16 enclosed, and am considering a 66" Hustler also. I loaded one on my trailer at the dealership today. It fits- really tight, but it fits. I'm used to running my 61" Scag into the trailer with no problems. This was a bit of a challenge (keep slow!) I think after a little time, it wouldn't be a problem. Of course I wouldn't let any jackleg employees try it.